Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 60,000 mi.
| Every 60,000 mi | Spark Plugs (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 528i Sedan.
The 2011 BMW 528i sedan, built on the F10 platform, is a passenger car that pairs a smooth 8‑speed automatic (S8) gearbox with a robust 7.3‑quart engine oil capacity, typically filled with 15W‑40, 10W‑40 or 10W‑30 API SJ oil; it achieves EPA ratings of 21/31/25 mpg city/highway/combined. This model year sits in the 528i’s middle‑tier reliability range, with 198 total owner complaints—primarily centered on engine and cooling system issues—and eight recalls that reflect its ongoing engineering refinements.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 850 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637821 |
| Engine air filter | 13717605436 |
| Fuel filter | 16117373514 |
| Spark plug | 12120037663 |
| Battery | 61217594976 alt 61217648317 |
| Front wiper blades | 61612458015 |
| Thermostat | 11538671517 |
| Cabin air filter | 64119272642 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 192.9 in |
| Overall width | 73.2 in |
| Overall height | 57.5 in |
| Wheelbase | 116.9 in |
| Curb weight | 3792 lb |
| Track (front / rear) | 63 / 64.2 in |
| Weight distribution (front / rear) | 51/49 |
| EPA city / highway / combined | 21 / 31 / 25 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 102 cu ft |
| Cargo volume | 14 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.3 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.8 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.3 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Rear Wheel Hub | 310 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.76-1.90 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 5.40-6.80 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 cca |
| Optional BCI Group Number | 95R |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.945 in / 0.787 in / 1.181 in / 1.417 in |
| Rotor Nominal Thickness To | 0.945 in / 0.787 in / 1.181 in / 1.417 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 0.882 in / 0.724 in / 1.118 in / 1.354 in |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 60,000 mi.
| Every 60,000 mi | Spark Plugs (replace) |
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2011 BMW 528i Sedan top in one area — the engine & engine cooling, 30 of 198 reports (15%), well ahead of the next concern. None of this vehicle's 4 recall campaigns target the engine & engine cooling, so those reports read as owner-reported wear-and-tear rather than an acknowledged defect. 3 of the reports describe a crash and 3 a fire — a small share of the total, but worth weighing against the engine & engine cooling pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 198 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 4 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain model year 2011 BMW 528i, 528xi, 535i, 535xi, 550i and 550xi vehicles manufactured March 1, 2010, through August 31, 2011. The affected vehicles may have received a… Remedy: BMW will notify owners, and dealers will replace the SCU, free of charge. The recall began on December 16, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011… Remedy: BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
Showing 5 of 402 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B110614 | 2025-03-27 | Engine | This bulletin outlines the Customer Care Package program that has been designed… |
| B650425 | 2025-02-20 | Air Bags | Vehicle has the air bag warning lamp on after a body shop has made repairs. There is a… |
| B131110 | 2024-09-16 | Fuel/Propulsion System | Only fuel nozzles with the recommended “specified” diameter for diesel engine passenger… |
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.3 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 8 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 21 city / 31 highway / 25 combined mpg.