Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2016 Venza.
I’m sorry, but I can’t provide that paragraph because the information you supplied contains no details about the Venza’s body, platform, engine, or any standout specifications.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 24F · 585 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Engine, drivetrain, dimensions and economy.
| Overall length | 189 in |
| Overall width | 75.2 in |
| Overall height | 63.4 in |
| Wheelbase | 109.4 in |
| Curb weight | 3946 lb |
| Track (front / rear) | 64.2 / 64.2 in |
| Weight distribution (front / rear) | 57/43 |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
Independent road tests for the Venza of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2014 | Limited V6 3.5L V6 | 6.70 sec | 15.10 sec | 268 hp | AWD |
| 2021 | Hybrid XLE 2.5L I-4 + Elec 0.9-kWh | 7.10 sec | 15.40 sec | 219 hp | AWD |
| 2021 | Hybrid Limited 2.5L I-4 + Elec 0.9-kWh | 7.50 sec | 15.70 sec | 219 hp | AWD |
| 2021 | Hybrid Limited 2.5L I-4 + Elec 0.9-kWh | 7.60 sec | 15.80 sec | 219 hp | AWD |
| 2021 | Hybrid Limited 2.5L I-4 + Elec 0.9-kWh | 7.80 sec | 16.00 sec | 219 hp | AWD |
| 2009 | Wagon V6 3.5L V6 | 6.50 sec | 14.90 sec | 268 hp | FWD |
| 2009 | Wagon V6 3.5L V6 | 6.50 sec | 15.00 sec | 268 hp | FWD |
| 2009 | Wagon 2.7L I-4 | 8.40 sec | 16.80 sec | 182 hp | FWD |
Capacities, torques and tune-up values from the factory service manual.
This engine SAE J1703 · DOT 3 brake fluid. Torque the oil drain plug to 10.0 ft-lbs. The firing order is 1-2-3-4-5-6.
| Brake Fluid | SAE J1703 · DOT 3 |
| Power Steering Fluid | ATF |
| Engine Flywheel Bolts | 61 ft-lbs |
| Intake Manifold to Engine Bolts | Lower: 15 ft/lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 |
| Main Bearings | 16 |
| Engine Oil Pan Drain Plug | 10.0 ft-lbs |
| Engine Oil Pan Drain Plug | 10.0 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 7 ft-lbs |
| Steering Track (Rod End) Bolts | 36.0 ft-lbs |
| Transfer Case Fill Plug | 36.0 ft-lbs |
| Transfer Case Drain Plug | 36.0 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Cylinder Firing Order | 1-2-3-4-5-6 |
| Spark Plug Manufacturer | Toyota |
| Spark Plug Gap | .039 - .043 (2) in |
| Spark Plug Torque | 18 ft-lbs |
| Spark Plug Manufacturer | Toyota |
| Spark Plug Gap | .043 (2) in |
| Spark Plug Torque | 13 ft-lbs |
| Standard BCI Group Number | 24F |
| Standard BCI Cranking Performance | 585 cca |
| Regulated Fuel System Pressure (With Vacuum) | 44-50 @ idle or fuel pump running psi |
| Residual Pressure | 21 After 5 min, engine off psi |
| Regulated Fuel System Pressure (With Vacuum) | 55-61 @ idle or fuel pump running psi |
| Residual Pressure | 21 After 5 min, engine off psi |
| Injector Primary Resistance | 11.6-12.4 @ 68 degreesF ohms |
| Engine Compression | psi 142-210 / max variation 29 psi |
| Engine Compression | psi 128-178 max variation 10 psi |
| Engine Compression | psi 142-189 / max variation 15 psi |
| Brake Caliper Bolt to Carrier Torque | Front: 24; Rear: 23 / |
| Brake Caliper Carrier to Hub Bolt Torque | Front: 77; Rear: 58 /; Front: 77; Rear: 58 |
| ABS Sensor Torque | Front: 6; Rear: 4 / |
| Minimum Pad Thickness | Front: 0.039; Rear: 0.039 in |
| Minimum Shoe Thickness | 0.039 in |
| 1 | 7 ft. lbs., Step 2: 12 | 7 ft. lbs |
| 1 | 18 ft. lbs., Step 2: 90 | 18 ft. lbs |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 131 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| T-SB-0055-24 Rev2 | 2026-01-07 | Unknown Or Other | Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a… |
| T-SB-0058-23 Rev1 | 2025-06-13 | Electrical System | The air conditioning dye injection tool kit has been developed to aid in identifying the… |
| T-SB-0035-24 Rev2 | 2024-12-06 | Structure | Acid rain results from rainwater or other airborne moisture that become acidic due to… |
| T-SB-0038-24 Rev2 | 2024-12-06 | Structure | To prevent brake rotor rust from forming during transportation and storage, wheel film… |
| T-SB-0039-24 Rev2 | 2024-12-06 | Structure | The condition known as acid rain is caused by airborne chemicals or particles in the… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.