Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 S350.
The 2013 Mercedes S350 takes 8.5 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 850 CCA battery, OE oil filter 013997614564. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 013997614564 alt 0299975448 |
| Battery | 0019828208 |
| Front wiper blades | 2218201300 |
| Thermostat | 6422002315 |
| Cabin air filter | 2218300718 |
Engine, drivetrain, dimensions and economy.
| Overall length | 205.1 in |
| Overall width | 73.6 in |
| Overall height | 57.9 in |
| Wheelbase | 124.8 in |
| Curb weight | 4696 lb |
| Track (front / rear) | 62.6 / 62.6 in |
| Weight distribution (front / rear) | 52/48 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 8.5 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 110 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-4-2-5-3-6.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.5-13.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 3.5 Pints |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 8.5 qt |
| Intake Manifold to Engine Bolts | 11.8 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 110 ft-lbs |
| Cylinder Firing Order | 1-4-2-5-3-6 |
| Refrigerant | R134a |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 cca |
| Pressure Test | 20 psi |
| Radiator Cap Pressure Relief | 20.3 psi |
| Thermostat Opening Temperature | 185-192 °F |
| Engine Compression | 174-218 psi |
| Torque Caliper to Bracket | 21 ft-lbs |
| Torque to Knuckle | 81 ft-lbs / 133 ft-lbs |
| Rotor Nominal Thickness From | 0.945 in / 0.866 in / 1.26 in |
| Rotor Nominal Thickness To | 0.945 in / 0.866 in / 1.26 in |
| Rotor Minimum Machining | 0.866 in / 0.787 in / 1.2 in |
| Rotor Discard at or Under | 0.843 in / 0.764 in / 1.181 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
8.5 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.