Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1995 S350.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
| Engine air filter | 6030940404 |
| Fuel filter | 0014774201 |
| Thermostat | 6022000015 alt 6012030076 |
Engine, drivetrain, dimensions and economy.
| Overall length | 201.2 in |
| Overall width | 74.4 in |
| Overall height | 58.7 in |
| Wheelbase | 119.7 in |
| Curb weight | 4608 lb |
| Track (front / rear) | 63 / 62.2 in |
Capacities, torques and tune-up values from the factory service manual.
Torque lug nuts to 110 ft-lbs, the oil drain plug to 18.4 ft-lbs. The firing order is 1-5-3-6-2-4.
| Engine Oil Pan Drain Plug | 18.4 ft-lbs |
| Driveshaft Flange to Transmission | 33.0 ft-lbs |
| Lug Nuts | 110 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Gap | 0.031 in |
| Refrigerant | R134a |
| Refrigerant Capacity | 2.09-2.31 lbs |
| Oil Type | MB part number 0019890803 or equivalent |
| Oil Capacity | 5.41 oz |
| Thermostat Opening Temperature | 175 °F |
| Engine Oil Pressure | 43.5 psi |
| Engine Oil Pressure RPM | 3000 rpm |
| Intake Valve Lash | Hydraulic in |
| Exhaust Valve Lash | Hydraulic in |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Runout Limit | 0.003 in / 0.004 in |
| Rotor Nominal Thickness From | 1.181 in / 0.472 in |
| Rotor Nominal Thickness To | 1.181 in / 0.472 in |
| Rotor Minimum Machining | 1.102 in / 0.413 in |
| Rotor Discard at or Under | 1.079 in / 0.386 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.