Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 30,000 mi | Transfer Case Assembly (inspect fluid level) |
| Every 60,000 mi | Transmission Fluid & Filter (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2019 Charger 3.6L.
Built on the LD platform as a traditional passenger car, the 2019 Dodge Charger 3.6L pairs its engine with an 8-speed automatic transmission to deliver an EPA-rated 19/30/23 mpg. Maintaining that 3.6L powertrain requires 6.0 quarts of 5W-20 engine oil, a straightforward service spec for a vehicle capable of 30 mpg on the highway. In the context of the Charger's reliability history spanning 2001 to 2024, this model year sits firmly in the middle of the pack with 118 owner complaints—primarily concerning the air bags—and five recorded recalls. While the 2019 iteration is far removed from the model's worst days in 2006 with 1,293 complaints, it falls well short of the single complaint recorded in 2024, indicating a stable but imperfect track record for researchers to consider.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 94R · 730 CCA battery, OE oil filter 04892339BE. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 04892339BE alt 04884899AC |
| Engine air filter | 04861746AB alt 68172459AA |
| Spark plug | SP143877AB alt SP149125AF |
| Battery | BBH7F001AA alt BBH8F001AA |
| Front wiper blades | 68194930AB alt 05182439AB |
| Thermostat | 52028898AJ alt 05184894AA |
| Cabin air filter | 68535614AA |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic 8-spd |
| Overall length | 198.4 in |
| Overall width | 75.2 in |
| Overall height | 58.3 in |
| Wheelbase | 120.1 in |
| Curb weight | 4158 lb |
| Track (front / rear) | 63.4 / 63.8 in |
| Weight distribution (front / rear) | 56/44 |
| EPA city / highway / combined | 19 / 30 / 23 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 105 cu ft |
| Cargo volume | 16 cu ft |
| Recommended fuel | Regular Gasoline |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
No 2019 road test on record; the results below are same-engine tests from nearby model years, each shown under its own year.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2018 | 4 GT Plus Sedan 3.6L V6 | 6.40 sec | 14.90 sec | 300 hp | AWD |
| 2016 | SXT Blacktop Sedan 3.6L V6 | 6.20 sec | 14.70 sec | 292 hp | RWD |
| 2016 | SXT Blacktop Sedan 3.6L V6 | 6.40 sec | 14.80 sec | 292 hp | RWD |
| 2013 | SXT Sedan 3.6L V6 | 6.40 sec | 15.00 sec | 292 hp | RWD |
| 2012 | SXT Plus Sedan 3.6L V6 | 6.60 sec | 15.10 sec | 292 hp | RWD |
| 2012 | SXT Plus Sedan 3.6L V6 | 6.70 sec | 15.30 sec | 292 hp | RWD |
| 2011 | Rallye Plus Sedan 3.6L V6 | 7.20 sec | 15.70 sec | 292 hp | RWD |
| 2011 | Rallye Plus Sedan 3.6L V6 | 7.30 sec | 15.60 sec | 292 hp | RWD |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.0 qt of 5W-20 engine oil, Dot 3 brake fluid. Torque lug nuts to 130 ft-lbs. The firing order is 1-8-4-3-6-5-7-2.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.72 qt |
| Automatic Transmission Fluid | ATF +4 |
| Automatic Transmission Fluid Capacity | 8.1 qt |
| Brake Fluid | Dot 3 |
| Engine Coolant | MS-12106 |
| Engine Coolant Capacity | 10.0 |
| Engine Coolant | Mopar Antifreeze/Coolant |
| Crankshaft Position (CKP) Sensor Bolt(s) | 9.0 ft-lbs |
| Camshaft Position (CMP) Sensor Bolt(s) | 6.6 ft-lbs |
| Camshaft Bearing/Carrier Cap Bolts or Studs | 89 inch lbs. ft-lbs |
| Camshaft Bearing/Carrier Cap Bolts or Studs | 89.0 INCH LBS. ft-lbs |
| Engine Coolant Temperature (ECT) Sensor Bolt(s) | 22.0 ft-lbs |
| Oxygen (O2S) Sensor Bolt(s) | 38.0 ft-lbs |
| Flex or Driveplate Bolts | Use new bolts only: 70.0 ft-lbs |
| Engine Flywheel Bolts | 70 ft-lbs |
| Lug Nuts | 130 ft-lbs |
| Lug Nuts | 111 ft-lbs |
| Lug Nuts | 130 ft-lbs |
| Front Wheel Hub | 157.0 Do not re-use old hub nut ft-lbs |
| Rear Wheel Hub | 170.0 Do not re-use old hub nut ft-lbs |
| Rear Wheel Hub | 170.0 Do not re-use old hub nut ft-lbs |
| Cylinder Firing Order | 1-2-3-4-5-6 |
| Cylinder Firing Order | 1-8-4-3-6-5-7-2 |
| Cylinder Firing Order | 1-2-3-4-5-6 |
| Cylinder Firing Order | 1-8-4-3-6-5-7-2 |
| Ignition Coil Primary Resistance | 0.6-0.9 ohms |
| Ignition Coil Secondary Resistance | 6,000-9,000 ohms |
| Ignition Coil Primary Resistance | 0.6-0.9 ohms |
| Ignition Coil Secondary Resistance | 6,000-9,000 ohms |
| Refrigerant Capacity | R-134a |
| Oil Type | ND-11 |
| Refrigerant Capacity | R-1234yf |
| Oil Group | PAG |
| Oil Type | ND-12 |
| Standard BCI Group Number | 94R |
| Standard BCI Cranking Performance | 730 cca |
| Optional BCI Group Number | Police: 49 |
| Regulated Fuel System Pressure (With Vacuum) | 58.0 + or - 5.0 psi |
| Fuel Pump Pressure Minimum | 53.0 psi |
| Fuel Pump Pressure Maximum | 63.0 psi |
| Brake Caliper Bolt to Carrier Torque | Front: 44.0 ft-lbs; Rear: 23.0 ft-lbs |
| Brake Caliper Carrier to Hub Bolt Torque | Front: 121.0 ft-lbs; Rear: 98.0 ft-lbs |
| ABS Sensor Torque | Front: 6.0; Rear: 6.0 |
| Minimum Pad Thickness | Front: 0.04 in; Rear: 0.04 in |
| Vented Rotor Minimum Thickness after Refinish | Front: 1.181; Rear: 1.024 |
| Variation from Parallelism Thickness Variation | All Except SRT-8: .0004. SRT-8: .0016 |
| Maximum Rotor Runout | All Except SRT-8: |
| 1 | 15 ft. lbs., Step 2: 90°. | 15 ft. lbs |
| 1 | 30.0 ft. lbs., Step 2: 105° | 30 ft. lbs |
| 1 | 22 ft. lbs., Step 2: 33 ft. lbs., Step 3: 33 ft. lbs., Step 4: Turn 125° do not use a torque wrench., Step 5: Loosen all fasteners., Step 6: 22 ft. lbs., Step 7: 33 ft. lbs., Step 8: 33 ft. lbs., Step 9: Turn 130° do not use a torque wrench. | 22 ft. lbs |
| 1 | Bolts 1-10 | 25 ft. lbs |
| 1 | M12 Bolts 1-10 | 25 ft. lbs |
| 1 | M12 Bolts 1-10 | 25 ft. lbs |
| 1 | M12 Bolts 1-10 | 25 ft. lbs |
| 1 | 22 ft. lbs., Step 2: 33 ft. lbs., Step 3: Repeat Step 2, Step 4: 125° do not use a torque wrench., Step 5: Loosen all fasteners in reverse order., Step 6: 22 ft. lbs., Step 7: 33 ft. lbs., Step 8: 33 ft. lbs., Step 9: 130° do not use a torque wrench. | 22 ft. lbs |
| 1 | 4 ft. lbs., Step 2: 11 ft. lbs., Step 3: 22 | 4 ft. lbs |
Normal service, condensed from the factory interval matrix.
| Every 30,000 mi | Transfer Case Assembly (inspect fluid level) |
| Every 60,000 mi | Transmission Fluid & Filter (replace) |
Condensed service procedures for routine maintenance. Procedures that require dealer diagnostic equipment are identified and summarized only.
| Tool required | DRBIII scan tool (dealer / locksmith) |
| Why | Transmitter codes are written into the receiver in the passenger door module |
| When needed | After Sentry Key Immobilizer Module (SKIM) replacement |
| Tool required | DRBIII scan tool |
| Also required | The vehicle's four-digit PIN code |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The 2019 Dodge Charger generated 118 complaints, 5 recalls, and
All 118 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 5 campaigns on record for this vehicle.
Chrysler (FCA US LLC) is recalling certain 2018-2020 Dodge Charger Pursuit vehicles equipped with a "stealth mode." When stealth mode is selected, the backup camera rearview image will not display when the vehicle is in… Remedy: Chrysler will notify owners, and dealers will update body control module software to disable stealth mode when the vehicle is shifted into "Reverse", free of charge. The recall…
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger and Chrysler 300 vehicles. The instrument cluster may not properly illuminate driver warnings. As such, these vehicles fail to comply with the… Remedy: Chrysler has notified owners, and dealers will update the instrument cluster software, free of charge. The recall began April 8, 2019. Owners may contact Chrysler customer service…
Showing 5 of 334 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| S2208000045 REV.D | 2026-06-26 | Structure | Backup Camera Poor Image Quality Inspection |
| 18-044-26 | 2026-03-21 | Engine | Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction… |
| S2208000045 REV.C | 2026-03-18 | Unknown Or Other | Backup Camera Poor Image Quality Inspection |
| S2621000003 REV.A | 2026-03-09 | Power Train | The vehicle will exhibit a service transmission/check engine warning indicator for the… |
| S2608000010 | 2026-03-05 | Electrical System | Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.0 qt of 5W-20, per the factory manual.
NHTSA lists 5 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 19 city / 30 highway / 23 combined mpg.