Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 128I Coupe.
The 2013 BMW 128i Coupe is a two-door passenger car built on the E82 platform and mated to a six-speed automatic (S6), returning EPA fuel economy figures of 18 mpg city, 28 mpg highway, and 21 mpg combined. Service specifications are straightforward, calling for a 7.0-quart engine oil capacity and approved viscosities of 0W-30, 0W-40, or 5W-30, while the vehicle's reliability profile for this model year is defined by 39 total owner complaints and three recalls. With air bags accounting for the leading share of those complaints, the 2013 stands as a documented data point whose recall count and complaint concentration make it a year worth scrutinizing in any longitudinal study of the 128i's dependability.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637820 |
| Engine air filter | 13717542294 |
| Fuel filter | 16117163295 |
| Spark plug | 12120037663 |
| Front wiper blades | 61615A87C97 |
| Thermostat | 11537549476 |
| Cabin air filter | 64319142114 alt 64319313519 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 172 in |
| Overall width | 68.9 in |
| Overall height | 55.5 in |
| Wheelbase | 104.7 in |
| Curb weight | 3208 lb |
| Track (front / rear) | 57.5 / 58.3 in |
| Weight distribution (front / rear) | 52/48 |
| EPA city / highway / combined | 18 / 28 / 21 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.0 qt of 0W-30 / 0W-40 / 5W-30 engine oil, USE CASTROL BOT448 OR EQUIVALENT in the differential, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to 18.4 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83220142516 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil | USE CASTROL BOT448 OR EQUIVALENT |
| Differential Gear Oil Capacity | 1.7 qt |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 7.0 qt |
| Manual Transmission Fluid | BMW MTF part number 83229408942 |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 ft-lbs |
| Engine Oil Pan Drain Plug | 18.4 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 570 cca |
| Optional BCI Group Number | 94R |
| Optional BCI Cranking Performance | 640 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 19-23 psi |
| Thermostat Opening Temperature | 190 °F |
| Engine Compression | 130-261 PSI. 29 maximum variation. psi |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW 128I Coupe dominate in one area — the air bags, 25 of 39 reports (64%), well ahead of the next concern. That matters, because the air bags are also the target of recalls 20V-017 and 16V-071 on this vehicle — so the single most useful check before buying or servicing one is confirming they were actually performed. 1 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 39 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 3 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013… Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The…
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i… Remedy: BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018…
Showing 5 of 203 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B611026 | 2026-04-23 | Electrical System | While performing a 12-Volt battery jump start, disconnect, or replacement, Vehicle test… |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| SB23-01 | 2023-08-02 | Steering | Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471 |
| SB 23-01 | 2023-07-14 | Suspension | SPL Parts, Inc. manufacturers and distributes aftermarket lower control arms for… |
| B010122 | 2023-05-01 | Equipment | With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.0 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 3 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 18 city / 28 highway / 21 combined mpg.