B0095 indicates a fault with the right‑frontal restraints sensor, a component that monitors the occupant‑protection system on that side of the vehicle. The airbag control module records an abnormal voltage, resistance, or data path from this sensor, turning on the airbag warning light. In many cases the passenger‑airbag deployment capability is disabled until the fault is corrected.
Internal electrical failure of the sensor produces out‑of‑range readings, setting the code.
A cut, pinched, or corroded wire or a loose connector can interrupt the sensor’s signal path.
Moisture or road debris on the connector pins can create high resistance or intermittent contact.
If the sensor’s ground circuit is loose or the reference voltage is missing, the module will flag a fault.
In rare cases the module itself misinterprets the sensor data, but this is far less common than sensor or wiring issues.
No. The PCM rarely causes this code; the problem is almost always in the sensor, its wiring, or the connector.
The car can be driven, but the right‑frontal airbag may not deploy in a crash. It’s advisable to repair the fault promptly.
If the pretensioner shares the same sensor circuit, a defect in it can trigger the code, but the sensor itself is the most common source.
Any qualified mechanic with a proper OBD‑II scanner can clear the code and verify the fix; a dealership is not required.