Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| At 7,500 mi | Universal Vehicle Operation (inspect idle speed) |
| Every 7,500 mi | Accessory Drive Belt (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Tire & Wheel Assembly (rotate) |
| Every 15,000 mi | Axle Shaft Oil Seal (inspect) · Body Fasteners (torque) · Body Latches, Locks & Hinges (inspect) · Brake Drum Assembly (inspect) · Brake Line (inspect) · Brake Linings (inspect) |
| At 30,000 mi | Accessory Drive Belt (inspect) · Universal Vehicle Operation (inspect idle speed) |
| Every 30,000 mi | Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Engine Valves (inspect valve lash) · Exhaust System (Complete) (inspect) · Fuel Line (inspect) · Fuel System (inspect) |
| At 45,000 mi | Engine Coolant System (drain, flush & refill) |
| Every 60,000 mi | Fuel Evaporative Canister (inspect) · Fuel Tank Filler Cap O-Ring (inspect) |
| At 80,000 mi | Oxygen Sensor (inspect) |
| At 120,000 mi | Accessory Drive Belt (inspect) |