Suzuki›Xl-7 FWD›2007›Overview/suzuki/xl-7-fwd/2007/base/

2007 Suzuki Xl-7 FWD

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2007 Xl-7 FWD.

Body SUVTransmission Automatic (S5)

The 2007 Suzuki XL‑7 FWD is a compact SUV built on a front‑drive platform, powered by a 5.5‑quart engine that runs on 5W‑30 API‑rated oil, and equipped with an automatic five‑speed transmission (S5). It delivers EPA‑rated fuel economy of 16 mpg city, 21 mpg highway, and 18 mpg combined, positioning it in the mid‑range for its class. In the 2007 model year, the XL‑7 received two recalls and a modest total of 138 owner complaints—primarily related to air‑bag issues—indicating a relatively stable reliability record for that generation.

Model year2009 2008 2007

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity5.5 qtOEM · verified

Engine oil type5W-30 APIOEM · verified

Lug nut torque100 ft-lbsOEM · verified

EPA fuel economy16/21/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 47 · 650 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 47 · 650 CCAOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

Transmission

Automatic (S5)

Ratings & economy EPA / vPIC

EPA city / highway / combined	16 / 21 / 18 mpg
Drivetrain	4-Wheel or All-Wheel Drive
Recommended fuel	Regular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 5.5 qt of 5W-30 API engine oil, SYNTHETIC · 75W-90 · GL-5 in the differential, DOT 3 brake fluid. Torque lug nuts to 100 ft-lbs, the oil drain plug to 26.0 ft-lbs. The firing order is 1-2-3-4-5-6. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission Fluid	ATF
Automatic Transmission Fluid Capacity	4.2
Brake Fluid	DOT 3
Differential Gear Oil	SYNTHETIC · 75W-90 · GL-5
Differential Gear Oil Capacity	1 Pints
Engine Coolant	USE DEX-COOL OR EQUIVALENT
Engine Oil	5W-30 · API
Engine Oil Capacity	5.5 qt

Engine torques

Intake Manifold to Engine Bolts	17 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	15 ft-lbs
Engine Oil Pan Drain Plug	26.0 ft-lbs

Chassis torques

Lug Nuts	100 ft-lbs
Transfer Case Fill Plug	17.0 ft-lbs
Transfer Case Drain Plug	17.0 ft-lbs
Front Wheel Hub	151 ft-lbs
Rear Wheel Hub	151 ft-lbs

Ignition

Cylinder Firing Order	1-2-3-4-5-6
Ignition Timing	15, Not adjustable degrees
Ignition Timing Acceptable Variance	5 degrees
Ignition Timing Reference RPM	Idle rpm

Battery & A/C

Refrigerant	R134a
Refrigerant Capacity	Single A/C, 1.30; dual A/C, 2.12. lbs
Oil Group	PAG
Oil Type	46
Oil Capacity	Single A/C, 4.40, dual A/C, 8.10. oz
Standard BCI Group Number	47
Standard BCI Cranking Performance	650 cca

Service checks

Thermostat Opening Temperature	194 °F
Regulated Fuel System Pressure (With Vacuum)	55.0-60.0 psi
Engine Compression	140 psi @ rpm. 70% maximum variation psi.
Engine Oil Pressure	10 psi @ Idle, 20 psi @ 2000 rpm psi
Intake Valve Lash	Hydraulic in
Exhaust Valve Lash	Hydraulic in

Brakes

Torque Caliper to Bracket	20 ft-lbs
Torque to Knuckle	136 ft-lbs / 89 ft-lbs
Minimum Pad Thickness	Front: 0.079; Rear: 0.079 in
Minimum Shoe Thickness	.140 in
Rotor Max Parallel Variation	0.001 in
Rotor Runout Limit	0.002 in
Rotor Finish	1.079 μin / 0.724 μin

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

74 ft. lbs., step 2: 150

74 ft. lbs

Cylinder Head — tightening sequence 2 stages

Prep M11 Bolts:

1	22 ft. lbs.	22 ft. lbs
2	150 degrees.; M8 Bolts 9-10:	150 degrees
1	11 ft. lbs.	11 ft. lbs
2	75 degrees.; Do not reuse cylinder head bolts. Do not allow oil on cylinder head, head bolt bosses.	75 degrees

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 100,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 5,000 mi	Tire & Wheel Assembly (rotate)
Every 25,000 mi	Exhaust System (Complete) (inspect) · Fuel System (inspect)
Every 50,000 mi	Engine Air Filter Element (replace)
Every 60,000 mi	Transfer Case Assembly (drain & refill)
Every 100,000 mi	Spark Plugs (replace) · Transmission Assembly (drain & refill)
At 150,000 mi	Accessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 2007 Suzuki Xl-7 FWD top in one area — the air bags, 19 of 138 reports (14%), well ahead of the next concern. None of this vehicle's 2 recall campaigns target the air bags, so those reports read as owner-reported wear-and-tear rather than an acknowledged defect. 0 of the reports describe a crash and 3 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

Open recalls

NHTSA campaigns

Service bulletins

Manufacturer communications

ODI investigations

Office of Defects Investigation

138

Owner complaints

0 involved a crash · 3 a fire

NHTSA crash-test rating federal NCAP · out of 5 stars

Rollover★★★★★

Owner complaints filed with NHTSA, by component

All 138 complaints on record, top 8 components.

Air Bags19

Steering15

Fuel/Propulsion System12

Engine9

Fuel System, Gasoline8

Engine & Engine Cooling7

Electrical System6

Engine,Fuel/Propulsion System4

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 2 campaigns on record for this vehicle.

12V597000Fuel System, Gasoline:Delivery:Fuel PumpReported 20/12/2012

American Suzuki is recalling certain model year 2007 XL-7 vehicles originally sold or currently registered in Arizona, California, Nevada, and Texas; and manufactured June 13, 2006, through December 22, 2006. Some of… Remedy: American Suzuki will notify owners, and dealers will replace the fuel pump module, free of charge. An interim letter was mailed on March 7, 2013. Owners may contact American…

07V277000Visibility:WindshieldReported 14/06/2007

CERTAIN VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." AN INCORRECT PRIMER MAY HAVE BEEN USED WHEN INSTALLING THE WINDSHIELD. Remedy: DEALERS WILL INSPECT AND REPLACE ANY GLASS (WINDSHIELD, LIFTGATE GLASS, OR THE SIDE STATIONARY GLASS) THAT WAS INSTALLED INCORRECTLY.THE RECALL BEGAN ON JULY 10, 2007. OWNERS MAY…

Technical service bulletins NHTSA · verified

Showing 5 of 58 bulletins on record with NHTSA.

Bulletin	Date	Component	Summary
SUZ_016008	2022-07-08	Suspension	Reminder of the importance to conduct safety inspections for rust damage to suspension…
16NA338	2019-10-14	Power Train	This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to…
PIT5074L	2019-06-03	Electrical System	This Preliminary Information communication provides information to the technician about…
PIC5260C	2019-04-23	Visibility	This Preliminary Information communication advises the technician the steps on diagnosing…
PIP5628	2019-02-18	Engine And Engine Cooling	This Preliminary information communicates information that will need to be provided to…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific Xl-7 FWD. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Group 47 battery Vehicles taking 5.5 qt

Reference guides

Cross-vehicle references for the kinds of data on this page.

Vehicle recalls & TSBs OBD-II trouble codes Torque specifications Maintenance schedules Fluid capacities & specs

Frequently asked

How much oil does the 2007 Xl-7 FWD take?

5.5 qt of 5W-30 API, per the factory manual.

Does the 2007 Xl-7 FWD have open recalls?

NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the Xl-7 FWD get?

EPA figures are 16 city / 21 highway / 18 combined mpg.