Subaru›Standard›1986›Overview/subaru/standard/1986/base/

1986 Subaru Standard

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1986 Standard.

The 1986 Subaru Standard takes 3.7 qt of 10W-30 engine oil.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity3.7 qtOEM · verified

Engine oil type10W-30 / 10W-40 / 10W-50 API SMOEM · verified

Capacities, torques and tune-up values from the factory service manual.

This engine holds 3.7 qt of 10W-30 / 10W-40 / 10W-50 API SM engine oil, 80W-90 · GL-5 in the differential.

Differential Gear Oil	80W-90 · GL-5
Differential Gear Oil Capacity	1.5 Pints
Engine Oil	10W-30 · 10W-40 · 10W-50 · API
Engine Oil Capacity	3.7 qt
Transfer Case Fluid	75W-90 · GL-5
Transfer Case Fluid Capacity	2 Pints

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 3,000 mi.

At 3,000 mi	Engine Oil (drain & refill) · Engine Oil Filter (replace)
Every 7,500 mi	Axle Shaft Oil Seal (inspect) · Brake Linings (inspect) · Brake Rotor (inspect) · CV Joint Boot (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace)
Every 15,000 mi	Body Latches, Locks & Hinges (inspect) · Brake System (inspect) · Clutch Assembly (inspect) · Engine Coolant System (leak inspection) · Engine Valves (inspect valve lash) · Hill Holder System (inspect)
Every 30,000 mi	Accessory Drive Belt (inspect) · Brake Drum Assembly (inspect) · Brake Hydraulic System (drain, refill & bleed) · Brake Power Booster Unit (inspect) · Choke System (inspect) · Differential (inspect fluid level)