Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 15,000 mi; coolant every 15,000 mi. The big-interval services (every 15,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Diesel Emissions Fluid (inspect fluid level) · Driveshaft U-Joint (lubricate) · Tie Rod (lubricate) · Tire & Wheel Assembly (rotate) |
| Every 8,000 mi | Battery (inspect) · Brake System (inspect) · Driveshaft U-Joint (lubricate) · Tire & Wheel Assembly (rotate) · Transmission Assembly (inspect fluid level) |
| Every 15,000 mi | Drive Axle Assembly (inspect) · Engine Coolant System (inspect fluid level) · Engine Coolant System Hoses (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Exhaust System (Complete) (inspect) |
| Every 15,500 mi | Fuel Tank Filler Cap O-Ring (inspect) |
| Every 18,000 mi | Fuel Filter (replace) |
| Every 22,500 mi | Accessory Drive Belt (inspect) · Brake Linings (inspect) · Parking Brake System (inspect) |
| Every 30,000 mi | CV Joint Boot (inspect) · Differential (inspect fluid level) · Engine Air Filter Element (replace) · Transfer Case Assembly (inspect fluid level) · Wheel Bearing (inspect) |
| Every 36,000 mi | Fuel Tank (inspect) |
| Every 67,500 mi | Engine Breather Filter (replace) |