Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2021 Qashqai.
Engine, drivetrain, dimensions and economy.
| Overall length | 172.4 in |
| Overall width | 64.6 in |
| Overall height | 62.6 in |
| Wheelbase | 104.3 in |
| Curb weight | 3347 lb |
| Track (front / rear) | 62.6 / 62.2 in |
| Weight distribution (front / rear) | 59/41 |
Capacities, torques and tune-up values from the factory service manual.
The firing order is 1-3-4-2.
| Engine Flywheel Bolts | 80.0 ft-lbs |
| Engine Flywheel Bolts | 80.0 ft-lbs |
| Intake Manifold to Engine Bolts | 18.0 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 25.0 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 62.0 Inch lbs. ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 5.0 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| 1 | 17.0 inch lbs., Step 2: 52.0 inch lbs., Step 3: 84.0 inch lbs. | 17 in |
| 1 | 1.4 ft. lbs., Step 2: 4.3 ft. lbs., Step 3: 7.0 | 1.4 ft. lbs |
| 1 | 20.0 ft. lbs., Step 2: Loosen all bolts., Step 3: 14.0 ft. lbs., Step 4: 60-65° | 20 ft. lbs |
| 1 | 20.0 ft. lbs., Step 2: Loosen all Bolts., Step 3: 14.0 ft. lbs., Step 4: 60-65° | 20 ft. lbs |
| 1 | 22.0 ft. lbs., Step 2: 60° | 22 ft. lbs |
| 1 | 30.0 ft. lbs., Step 2: 100°, Step 3: Loosen all bolts in reverse order of tightening. Step 4: 30.0 ft. lbs., Step 5: 100°, Step 6: 100° | 30 ft. lbs |
| 1 | 25.0 ft. lbs., Step 2: 60° | 25 ft. lbs |
| 1 | 25.0 ft. lbs., Step 2: 60° | 25 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.