Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 John Cooper Works Clubman.
The 2011 John Cooper Works Clubman is a passenger car built on Mini’s R55 platform, pairing its performance-oriented JCW tuning with a six-speed manual transmission and fuel economy rated at 25 mpg city, 32 mpg highway, and 28 mpg combined. Routine maintenance is straightforward, with the engine taking 4.4 quarts of 5W-30 oil, though owners should be aware that this model year has accumulated 17 complaints and two recalls, with electrical system issues standing out as the most frequently reported problem. Taken together, that complaint volume and the electrical-system concentration place this 2011 model in a less favorable spot within the Clubman’s reliability history, meaning researchers and prospective owners should weigh those known electrical concerns carefully when evaluating this chassis.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI L1 · 480 CCA battery, OE oil filter 11428643758. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428643758 alt 11427622446 |
| Engine air filter | 13717568728 alt 13717561235 |
| Fuel filter | 11252754870 |
| Spark plug | 12120035531 alt 12122158165 |
| Battery | 61217571896 alt 61217575326 |
| Front wiper blades | 61610028137 |
| Thermostat | 11518613803 alt 11518613804 |
| Cabin air filter | 64319127516 |
Engine, drivetrain, dimensions and economy.
| Transmission | Manual 6-spd |
| Overall length | 155.9 in |
| Overall width | 66.1 in |
| Overall height | 56.3 in |
| Wheelbase | 100.4 in |
| Curb weight | 2895 lb |
| Track (front / rear) | 56.7 / 57.1 in |
| Weight distribution (front / rear) | 59/41 |
| EPA city / highway / combined | 25 / 32 / 28 mpg |
| Drivetrain | Front-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 4.4 qt of 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | With CVT: BMW part number 83220136376 |
| Brake Fluid | DOT 4 |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | SYNTHETIC · 5W-30 |
| Engine Oil Capacity | 4.4 qt |
| Manual Transmission Fluid Capacity | 3.6-4.0 |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Power Steering Fluid | USE BMW PART NO. 82110148132 PENTOSIN CHF11S |
| Camshaft Bearing/Carrier Cap Bolts or Studs | 6 ft-lbs |
| Camshaft Bearing/Carrier Cap Bolts or Studs | 9 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11 ft-lbs, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Curb Idle Speed (No Load) | 770 rpm |
| Curb Idle Speed Variance (No Load) | 50 rpm |
| Spark Plug Manufacturer | BMW |
| Spark Plug Gap | Not adjustable in |
| Spark Plug Torque | 14.8-19.2 ft-lbs |
| Refrigerant | R134a |
| Optional BCI Group Number | 48 |
| Optional BCI Cranking Performance | 570 cca |
| Standard BCI Group Number | L1 |
| Standard BCI Cranking Performance | 480 cca |
| Pressure Test | 22 psi |
| Radiator Cap Pressure Relief | 18-22 psi |
| Engine Compression | 116-174 PSI. 43 maximum variation. psi |
| Torque to Knuckle | 81 ft-lbs |
| Brake Application | WITH FN3 |
| Torque Caliper to Bracket | 26 ft-lbs |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Rotor Nominal Thickness From | 0.394 in / 0.866 in / 0.945 in |
| Rotor Nominal Thickness To | 0.394 in / 0.866 in / 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| 1 | 4 ft. lbs., Step 2: 11 ft. lbs., Step 3: 130 | 4 ft. lbs |
| 1 | 4 ft. lbs., Step 2: 11 ft. lbs., Step 3: 130 | 4 ft. lbs |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 6 ft. lbs., Step 2: 22 ft. lbs., Step 3: 90 | 6 ft. lbs |
| 1 | 6 ft. lbs., Step 2: 22 ft. lbs., Step 3: 90 | 6 ft. lbs |
| 1 | 37 ft. lbs., Step 2: 100 | 37 ft. lbs |
| 1 | 37 ft. lbs., Step 2: 150 | 37 ft. lbs |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2011 Mini John Cooper Works Clubman dominate in one area — the electrical system, 6 of 17 reports (35%), well ahead of the next concern. That matters, because the electrical system are also the target of recalls 11V-299 and 23V-337 on this vehicle — so the single most useful check before buying or servicing one is confirming they were actually performed. 0 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the electrical system pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 17 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 2 campaigns on record for this vehicle.
BMW Is recalling certain model year 2011 Mini Cooper Clubman and Cooper S Clubman vehicles manufactured from February 8, 2011, through May 11, 2011, for failing to comply with the requirements of Federal Motor Vehicles… Remedy: All affected vehicles have been repaired at dealerships. Therefore, an owner notification letter will not be issued for this campaign. Owners may contact BMW at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2014 MINI Clubman Cooper, Clubman Cooper S, Clubman John Cooper Works, and 2007-2013 MINI Hardtop 2-Door Cooper, Cooper S, and John Cooper Works vehicles sold… Remedy: Dealers will inspect the sunroof drains, interior footwell area, and FRM and, depending upon the results of the inspection, certain components will be replaced. Owner notification…
Showing 5 of 127 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| M010616 | 2026-05-06 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| M010616 | 2025-03-18 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| M610607 | 2023-10-25 | Electrical System | MINI electrical systems have continued to develop over the past few years. As a result… |
| M360119 | 2021-12-01 | Equipment | New RDC wheel electronics will be introduced with future generation MINI models. The new… |
| M011116 | 2020-08-01 | Seats | OC3 SEAT OCCUPANCY MAT - LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Interactive fuse-box and wiring references for this vehicle, searchable by circuit.
Cross-vehicle references for the kinds of data on this page.
4.4 qt of USE MINI SYNTHETIC 5W-30 MOTOR OIL, per the factory manual.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 25 city / 32 highway / 28 combined mpg.