Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 Cooper S Clubman.
The 2013 Mini Cooper S Clubman is a passenger‑car built on the R55 platform, powered by a turbocharged engine that requires 4.4 qt of 5W‑30 oil and is paired with an automatic S6 transmission. Its EPA‑rated fuel economy of 26 / 34 / 29 mpg (city/highway/combined) underscores the model’s efficiency‑oriented design. In the broader reliability window spanning 2011‑2021, this year sits near the lower end of complaint totals, with only 13 owner complaints—primarily in the electrical system—well below the peak of 46 complaints in 2014, indicating a relatively robust ownership experience for the 2013 Clubman.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI L1 · 480 CCA battery, OE oil filter 11428643758. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428643758 alt 11427622446 |
| Engine air filter | 13717568728 alt 13717561235 |
| Fuel filter | 11252754870 alt 16112755084 |
| Spark plug | 12122158165 alt 12122293697 |
| Battery | 61217575326 alt 61217571896 |
| Front wiper blades | 61612239962 alt 61610039343 |
| Thermostat | 11518613804 alt 11518613803 |
| Cabin air filter | 64319127516 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 155.9 in |
| Overall width | 66.1 in |
| Overall height | 56.3 in |
| Wheelbase | 100.4 in |
| Curb weight | 2855 lb |
| Track (front / rear) | 56.7 / 57.1 in |
| Weight distribution (front / rear) | 59/41 |
| EPA city / highway / combined | 26 / 34 / 29 mpg |
| Drivetrain | Front-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 4.4 qt of 5W-30 engine oil, USE CASTROL SAF-X0 OR EQUIVALENT in the differential, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to 23.0 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | With CVT: BMW part number 83220136376 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil | USE CASTROL SAF-X0 OR EQUIVALENT |
| Differential Gear Oil Capacity | 0.8 qt |
| Engine Oil | SYNTHETIC · 5W-30 |
| Engine Oil Capacity | 4.4 qt |
| Engine Oil | SYNTHETIC · 5W-30 |
| Engine Oil Capacity | 4.4 qt |
| Camshaft Bearing/Carrier Cap Bolts or Studs | 9 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11 ft-lbs, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Intake Manifold to Engine Bolts | Bolts: 11, nuts: 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Engine Oil Pan Drain Plug | 23.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Curb Idle Speed (No Load) | 770 rpm |
| Curb Idle Speed Variance (No Load) | 50 rpm |
| Spark Plug Manufacturer | BMW |
| Spark Plug Gap | Not adjustable in |
| Spark Plug Torque | 14.8-19.2 ft-lbs |
| Refrigerant | R134a |
| Optional BCI Group Number | 48 |
| Optional BCI Cranking Performance | 570 cca |
| Standard BCI Group Number | L1 |
| Standard BCI Cranking Performance | 480 cca |
| Pressure Test | 22 psi |
| Radiator Cap Pressure Relief | 18-22 psi |
| Engine Compression | 116-174 PSI. 43 maximum variation. psi |
| Torque to Knuckle | 81 ft-lbs |
| Brake Application | WITH FN3 |
| Torque Caliper to Bracket | 26 ft-lbs |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Rotor Nominal Thickness From | 0.394 in / 0.866 in / 0.945 in |
| Rotor Nominal Thickness To | 0.394 in / 0.866 in / 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| 1 | 4 ft. lbs., Step 2: 11 ft. lbs., Step 3: 130 | 4 ft. lbs |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 | |
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
| 1 | 6 ft. lbs., Step 2: 22 ft. lbs., Step 3: 90 | 6 ft. lbs |
| 1 | 37 ft. lbs., Step 2: 150 | 37 ft. lbs |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Federal data positions the 2013 model year as a distinct low point in the Clubman’s defect trajectory, registering only 13 complaints, zero recalls, and zero investigations—figures that represent a sharp decline from 2012’s 25 complaints and 2 recalls, and a dramatic contrast to 2014’s subsequent spike of 46 complaints and 7 recalls. While 2011 showed moderate activity with 12 complaints and 3 recalls, 2013 stands alone as the only model year in the sequence with no federal safety recalls or investigations, accompanied by the lowest technical service bulletin count (100) of the 2011-2014 production window. The complaint profile for 2013 centers on electrical system issues, with four discrete electrical complaints and no reported crashes or fires, though the data does not specify root causes for these anomalies. This model year immediately precedes the 2014 surge that brought the highest complaint and recall volumes in the generation, suggesting 2013 vehicles may predate the specific component failures that triggered 2014’s regulatory activity. Given its minimal federal footprint and absence of safety recalls compared to immediately adjacent model years, the 2013 Cooper S Clubman represents the most statistically favorable purchase window within this generation, provided buyers verify that any applicable earlier recalls on the specific vehicle were completed.
All 13 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 100 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| M010616 | 2026-05-06 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| M610226 | 2026-04-30 | Electrical System | While performing a 12-Volt battery jump start, disconnect, or replacement, vehicle test… |
| M010616 | 2025-03-18 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| M010616 | 2025-02-21 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| M610124 | 2024-02-01 | Electrical System | Customers with a genuine MINI âÂÂClick and Drive Systemâ (C&D) accessory… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
4.4 qt of USE MINI SYNTHETIC 5W-30 MOTOR OIL, per the factory manual.
NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 26 city / 34 highway / 29 combined mpg.