Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 Sprinter 3500.
The 2013 Mercedes Sprinter 3500 takes 13.2 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 850 CCA battery, OE oil filter 013997614564. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 013997614564 alt 0299975448 |
| Engine air filter | 0000903751 |
| Fuel filter | 6420906352 alt 6420920401 |
| Battery | 0009823308 alt 0019828208 |
| Front wiper blades | 9068201000 |
| Thermostat | 6422002015 |
| Cabin air filter | 9068300218 alt 9068300318 |
Engine, drivetrain, dimensions and economy.
| Overall length | 239.8 in |
| Overall width | 79.1 in |
| Overall height | 95.7 in |
| Wheelbase | 144.5 in |
| Curb weight | 4711 lb |
| Track (front / rear) | 67.7 / 68.5 in |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 13.2 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 126-140 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-4-2-5-3-6.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 7.5-10.5 |
| Brake Fluid | DOT 4 |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 13.2 qt |
| Intake Manifold to Engine Bolts | 11.8 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 18.4 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 126-140 ft-lbs |
| Rear Wheel Hub | 184 ft-lbs |
| Cylinder Firing Order | 1-4-2-5-3-6 |
| Refrigerant | R134a |
| Refrigerant Capacity | 2.50 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 6.40 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 cca |
| Engine Compression | 174-218 psi |
| Minimum Pad Thickness | Front: 0.118; Rear: 0.118 in |
| Rotor Nominal Thickness From | 1.102 in |
| Rotor Nominal Thickness To | 1.102 in |
| Rotor Discard at or Under | 0.984 in |
| Rotor Runout Limit | 0.0011 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
13.2 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.