Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1998 SL500.
The 1998 Mercedes SL500 takes 8.5 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 825 CCA battery, OE oil filter 119180000967. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 119180000967 |
| Engine air filter | 0030946104 |
| Fuel filter | 0024772701 |
| Spark plug | 0031598103 |
| Battery | 0009823308 |
| Thermostat | 1199970445 alt 1192000015 |
| Cabin air filter | 129835004764 |
Engine, drivetrain, dimensions and economy.
| Overall length | 177.2 in |
| Overall width | 71.3 in |
| Overall height | 51.2 in |
| Wheelbase | 99.2 in |
| Curb weight | 4167 lb |
| Track (front / rear) | 60.6 / 59.8 in |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 8.5 qt of 0W-30 / 5W-30 / 0W-40 engine oil, 80W-90 · GL-5 in the differential. The firing order is 1-5-4-8-6-3-7-2.
| Differential Gear Oil | 80W-90 · GL-5 |
| Differential Gear Oil Capacity | 2.5 Pints |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 8.5 qt |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Gap | 0.031 in |
| Ignition Timing | 5-20 degrees |
| Refrigerant | R134a |
| Refrigerant Capacity | 2.09 lbs |
| Oil Type | MB part number 0019890803 or equivalent |
| Oil Capacity | 4.73 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 825 cca |
| Pressure Test | 20 psi |
| Thermostat Opening Temperature | 180-187 °F |
| Injector Primary Resistance | 14-17 ohms |
| Engine Compression | 145-203 psi |
| Engine Oil Pressure | 10 psi @ 700 rpm, 43.5 @ 3000 rpm psi |
| Intake Valve Lash | Hydraulic in |
| Exhaust Valve Lash | Hydraulic in |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 38 ft-lbs |
| Torque to Knuckle | 85 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Rotor Runout Limit | 0.006 in / 0.003 in |
| Rotor Nominal Thickness From | 0.394 in / 0.866 in / 1.181 in |
| Rotor Nominal Thickness To | 0.394 in / 0.866 in / 1.181 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
8.5 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.