Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2020 SL450.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 This vehicle requires an AGM VRLA battery to be used. Battery is vented outside of the vehicle. Auxilliary: 400 · 850 European Norm Rating.; Auxilliary: 12 O.E. AmpHrs. CCA battery, OE oil filter 0209975445. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0209975445 alt 2761800009 |
| Engine air filter | 276094050490 |
| Fuel filter | 1724700400 |
| Battery | 2115410001 alt 0019828208 |
| Front wiper blades | 2318201045 alt 2318200945 |
| Thermostat | 276201068064 alt 2762000600 |
Engine, drivetrain, dimensions and economy.
| Overall length | 182.3 in |
| Overall width | 74 in |
| Overall height | 52 in |
| Wheelbase | 102 in |
| Curb weight | 3825 lb |
| Track (front / rear) | 63 / 63 in |
| Weight distribution (front / rear) | 50/50 |
Capacities, torques and tune-up values from the factory service manual.
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 |
| Brake Caliper Bolt to Carrier Torque | Front: NS; Rear: 26.0 ft-lbs |
| Brake Caliper Carrier to Hub Bolt Torque | Front: NS; Rear: 81.0 ft-lbs |
| ABS Sensor Torque | Front: 6.0; Rear: 6.0 |
| Vented Rotor Minimum Thickness for Replacement | Front: 1.181; Rear: .866 |
| 1 | 15.0 ft. lbs., Step 2: 33.0 ft. lbs., Step 3: 90° | 15 ft. lbs |
| 1 | 44.0 inch lbs., Step 2: 15.0 | 44 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.