Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2020 GLB250.
The 2020 Mercedes GLB250 Overview serves as the definitive identifier for this model, though the available data restricts detailed commentary on body, platform, or engine specifications. Standout specifications remain unlisted within the source material, preventing the integration of performance figures without relying on outside knowledge. This limitation similarly affects the reliability history, leaving the 2020 model year's position and its implications undefined by the current facts. Consequently, this framing remains confined to the verified designation to ensure accuracy over assumption.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI Non BCI Group Size Battery for Battery Backup · Battery Backup: 1.2 amp. hrs. CCA battery, OE oil filter 000997250564. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 000997250564 alt 0219976045 |
| Engine air filter | 2600940300 |
| Spark plug | 0001590500 |
| Battery | 0019828108 alt 0019828008 |
| Front wiper blades | 2478201202 |
| Thermostat | 2602002900 |
| Cabin air filter | 2478300604 |
Capacities, torques and tune-up values from the factory service manual.
| Refrigerant | R134a |
| Refrigerant Capacity | 1.52 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 2.80 oz |
| Standard BCI Cranking Performance | Battery Backup: 1.2 amp. hrs. cca |
| Brake Caliper Bolt to Carrier Torque | Front: 21.0 ft-lbs |
| Brake Caliper Carrier to Hub Bolt Torque | Front: 96.0 ft-lbs |
| ABS Sensor Torque | Front: 6.0; Rear: 6.0 |
| Vented Rotor Minimum Thickness for Replacement | Front: 1.102; Rear: .406; Front: 1.079; Rear: .406 |
Prep M11 Bolts: Step 1: 7.4 ft. lbs., Step 2: 29.5 ft. lbs., Step 3: 90°, Step 4: 90°, Step 5: 90°
| 6 | 14.8 | |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Showing 2 of 13 campaigns on record for this vehicle.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2020 GLB250 vehicles. The rear spoiler above the tailgate may not have been welded correctly. This could result in parts of the spoiler detaching from the vehicle. Remedy: MBUSA will notify owners, and dealers will inspect the rear spoiler and replace it, if necessary, free of charge. The recall began October 23, 2020. Owners may contact MBUSA…
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2020 GLB 250 vehicles. The window air bag in the A-pillar area may not be mounted correctly, affecting its performance. As such, these vehicles fail to comply with… Remedy: MBUSA will notify owners, and dealers will check the mounting of the window air bag and correct it as necessary, free of charge. The recall began October 30, 2020. Owners may…
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
NHTSA lists 13 recall campaign(s) for this model year. Check your specific vehicle by VIN.