Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 G550.
The 2013 Mercedes G550 takes 9.5 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 850 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Fuel filter | 1724700400 |
| Battery | 0019828208 alt 000982960864 |
| Front wiper blades | 4638200545 |
| Thermostat | 2722000515 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.5 qt of 0W-30 / 5W-30 / 0W-40 engine oil, MUST MEET MB SHEET: 235.00 in the differential, DOT 4 brake fluid. Torque the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.5-13.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil | MUST MEET MB SHEET: 235.00 |
| Differential Gear Oil Capacity | 3.8 qt |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 9.5 qt |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 11.8 ft-lbs |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Transfer Case Fill Plug | 44.0 ft-lbs |
| Transfer Case Drain Plug | 44.0 ft-lbs |
| Front Wheel Hub | 133 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Refrigerant | R134a |
| Refrigerant Capacity | 2.30 lbs |
| Oil Group | PAG |
| Oil Capacity | 5.75 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 cca |
| Engine Compression | 174 |
| Engine Compression | 174-232 psi |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque to Knuckle | 195 ft-lbs |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Rotor Runout Limit | 0.0003 in / 0.0005 in |
| Rotor Nominal Thickness From | 0.629 in / 1.181 in |
| Rotor Nominal Thickness To | 0.629 in / 1.181 in |
| Rotor Minimum Machining | 0.535 in / 1.086 in |
| Rotor Discard at or Under | 0.511 in / 1.063 in / 0.551 in |
| 1 | 148 ft. lbs., step 2: 90 | 148 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.5 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.