Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 E400.
It looks like the JSON provided only contains the vehicle name (`"2017 Mercedes E400 Overview"`) but none of the underlying facts — body style, platform, engine specs, standout figures, or reliability history. To write the paragraph you've described without inventing details, I'd need the full JSON with those fields populated. Could you share the complete data?
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48; AUXILLARY: 400; AUXILLARY: NA · 760; AUXILLARY: 200; AUXILLARY: 170 CCA battery, OE oil filter 0209975445. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0209975445 alt 2761800009 |
| Engine air filter | 276094050490 |
| Battery | 0019828108 alt 2115410001 |
| Front wiper blades | 2128201700 |
| Thermostat | 276201068064 alt 2762000600 |
Engine, drivetrain, dimensions and economy.
| Overall length | 193.7 in |
| Overall width | 72.8 in |
| Overall height | 57.9 in |
| Wheelbase | 115.7 in |
| Curb weight | 4012 lb |
| Track (front / rear) | 63 / 63.8 in |
| Weight distribution (front / rear) | 54/46 |
Capacities, torques and tune-up values from the factory service manual.
Torque lug nuts to 96 ft-lbs, the oil drain plug to 20.0 ft-lbs. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Crankshaft Position (CKP) Sensor Bolt(s) | 7.4 ft-lbs |
| Camshaft Position (CMP) Sensor Bolt(s) | 7.4 ft-lbs |
| Intake Manifold to Engine Bolts | 6.6 |
| Exhaust Manifold to Cylinder Head Bolts | 15 |
| Oil Pan to Block Bolts | 9.0 ft-lbs |
| Engine Oil Pan Drain Plug | 20.0 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Standard BCI Group Number | 48; AUXILLARY: 400; AUXILLARY: NA |
| Standard BCI Cranking Performance | 760; AUXILLARY: 200; AUXILLARY: 170 cca |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| 1 | 148.0 ft. lbs. | 148 ft. lbs |
| 2 | + 180 | |
Prep Do not reuse old bolts. Coat new bolts lightly with specified motor oil.
| 1 | Bolts 1-8 15.0 ft. lbs. | 15 ft. lbs |
| 2 | Bolts 1-8 | 29.5 ft. lbs |
| 3 | Bolt 1-8 | 90 degrees |
| 4 | Bolts 1-8 90 degrees | 90 degrees |
| 5 | Bolts 9 10.0 ft. lbs. | 10 ft. lbs |
| 1 | 15.0 ft. lbs., Step 2: 33.0 ft. lbs., Step 3: 90 | 15 ft. lbs |
| 1 | 44.0 inch lbs., Step 2: 15.0 | 44 in |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Showing 2 of 8 campaigns on record for this vehicle.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe… Remedy: MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service…
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 E450 4MATIC Wagon, 2017-2018 E400 4MATIC Wagon, and 2018-2019 E63S 4MATIC Wagon vehicles. The rear spoiler may detach. Remedy: MBUSA will notify owners, and dealers will inspect and correct the mounting of the spoiler, as necessary, free of charge. The recall began October 18, 2019. Owners may contact…
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
NHTSA lists 8 recall campaign(s) for this model year. Check your specific vehicle by VIN.