Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2008 CLK63 AMG Black Series.
The 2008 Mercedes CLK63 AMG Black Series takes 9.3 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 760 CCA battery, OE oil filter 1561840361. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 1561840361 alt 0001803009 |
| Engine air filter | 1560940504 |
| Spark plug | 0041593903 |
| Battery | 0009823108 alt 0019828008 |
| Thermostat | 1562030380 alt 1562030475 |
| Cabin air filter | 2038301200 |
Engine, drivetrain, dimensions and economy.
| Overall length | 182.7 in |
| Overall width | 68.5 in |
| Overall height | 54.3 in |
| Wheelbase | 107.1 in |
| Curb weight | 3902 lb |
| Track (front / rear) | 58.3 / 57.1 in |
| Weight distribution (front / rear) | 53/47 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.3 qt of 0W-30 / 5W-30 / 0W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 96 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 8.0-11.0 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2.5 Pints |
| Engine Coolant | USE ONLY COOLANT MEETING MB SHEET 325.0 |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 9.3 qt |
| Exhaust Manifold to Cylinder Head Bolts | 16.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Rear Wheel Hub | 162 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.65 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 4.06 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 760 cca |
| Optional BCI Group Number | 48 |
| Pressure Test | 20 psi |
| Thermostat Opening Temperature | 185-192 °F |
| Engine Compression | 174-232 psi |
| Torque Caliper to Bracket | 18 ft-lbs |
| Torque to Knuckle | 84 ft-lbs |
| Torque to Knuckle | 62 ft-lbs |
| Torque Caliper to Bracket | 18 ft-lbs |
| Torque to Knuckle | 84 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Nominal Thickness From | 1.417 in / 1.259 in / 1.023 in |
| Rotor Nominal Thickness To | 1.417 in / 1.259 in / 1.023 in |
| 1 | 184 ft. lbs., step 2: 360 degrees, step 3: 147 ft. lbs., step 4: 180 | 184 ft. lbs |
| 1 | 7.4, Step 2 | 90 degrees |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.3 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.