Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2007 CLK350 Cabriolet.
The 2007 Mercedes CLK350 Cabriolet takes 8.5 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 760 CCA battery, OE oil filter 0259976648. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0259976648 alt 0259976548 |
| Battery | 0019828008 alt 0009823108 |
| Thermostat | 015997614564 alt 2722000415 |
Engine, drivetrain, dimensions and economy.
| Overall length | 182.7 in |
| Overall width | 68.5 in |
| Overall height | 54.3 in |
| Wheelbase | 107.1 in |
| Curb weight | 3843 lb |
| Track (front / rear) | 58.3 / 57.1 in |
| Weight distribution (front / rear) | 53/47 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 8.5 qt of 0W-30 / 5W-30 / 0W-40 engine oil. Torque lug nuts to 96 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-3-6-2-4.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 7.5-9.5 |
| Differential Gear Oil Capacity | 2.3 Pints |
| Engine Coolant | USE ONLY COOLANT MEETING MB SHEET 325.0 |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 8.5 qt |
| Intake Manifold to Engine Bolts | Lower: 6.6; Upper: 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 96 ft-lbs |
| Rear Wheel Hub | 162 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.65 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 4.06 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 760 cca |
| Pressure Test | 20 psi |
| Thermostat Opening Temperature | 185-192 °F |
| Engine Compression | 174-218 psi |
| Torque Caliper to Bracket | 18 ft-lbs / 41 ft-lbs |
| Torque to Knuckle | 84 ft-lbs / 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Nominal Thickness From | 1.102 in / 1.181 in / 0.866 in |
| Rotor Nominal Thickness To | 1.102 in / 1.181 in / 0.866 in |
| Rotor Minimum Machining | 1.023 in / 1.122 in / 1.043 in / 0.787 in |
| Rotor Discard at or Under | 1 in / 1.102 in / 0.889 in / 0.763 in |
| 1 | 148 ft. lbs., step 2: 90 | 148 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
8.5 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.