Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 CL63 AMG.
The 2014 Mercedes CL63 AMG takes 9.0 qt of 0W-30 engine oil.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 850 CCA battery, OE oil filter 0309970748. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 0309970748 alt 278180000990 |
| Fuel filter | 2214701190 |
| Spark plug | 0041598103 |
| Battery | 0019828208 |
| Front wiper blades | 2218201300 |
| Thermostat | 2782010280 alt 2782001700 |
| Cabin air filter | 2218300718 |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.0 qt of 0W-30 / 5W-30 / 0W-40 engine oil. Torque lug nuts to 110 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-4-2-6-3-7-8.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 9.5-13.5 |
| Differential Gear Oil Capacity | 3 Pints |
| Differential Gear Oil Capacity | 3.0 qt |
| Engine Oil | 0W-30 · 5W-30 · 0W-40 · 5W-40 · 5W-50 |
| Engine Oil Capacity | 9.0 qt |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | M7 nuts: 11 ft-lbs, M8 nuts: 16 ft-lbs |
| Intake Manifold to Engine Bolts | 6.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12.0 ft-lbs |
| Engine Oil Pan Drain Plug | 22.1 ft-lbs |
| Lug Nuts | 110 ft-lbs |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Cylinder Firing Order | 1-5-4-2-6-3-7-8 |
| Refrigerant | R134a |
| Refrigerant Capacity | 2.40 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 3.72 oz |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 850 cca |
| Engine Compression | 174 |
| Engine Compression | 174-232 psi |
| Torque Caliper to Bracket | 81 ft-lbs / 21 ft-lbs |
| Torque to Knuckle | 110 ft-lbs / 133 ft-lbs |
| Rotor Nominal Thickness From | 1.023 in / 1.417 in |
| Rotor Nominal Thickness To | 1.023 in / 1.417 in |
| Rotor Minimum Machining | 0.944 in / 1.338 in |
| Rotor Discard at or Under | 0.921 in / 1.315 in |
| 1 | 148 ft. lbs., step 2: 180 | 148 ft. lbs |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.0 qt of 0W-30, 5W-30, 0W-40, 5W-40 OR 5W-50, per the factory manual.