Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2004 C32.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
| Engine air filter | 1120940404 |
| Battery | 0019828208 alt 0009823308 |
| Thermostat | 1122030076 alt 1122030375 |
| Cabin air filter | 2038301200 |
Engine, drivetrain, dimensions and economy.
| Overall length | 178.3 in |
| Overall width | 68.1 in |
| Overall height | 55.1 in |
| Wheelbase | 107.1 in |
| Curb weight | 3538 lb |
| Track (front / rear) | 58.7 / 57.5 in |
| Weight distribution (front / rear) | 53/47 |
Capacities, torques and tune-up values from the factory service manual.
The firing order is 1-4-6-3-2-5.
| Automatic Transmission Fluid | ATF |
| Automatic Transmission Fluid Capacity | 7.5-9.5 |
| Differential Gear Oil Capacity | 3.4 Pints |
| Intake Manifold to Engine Bolts | 15 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 12 ft-lbs |
| Cylinder Firing Order | 1-4-6-3-2-5 |
| Spark Plug Gap | 0.031 in |
| Ignition Timing | 6-10 degrees |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.80 lbs |
| Oil Group | PAG |
| Oil Type | MB part number 0019890803 or equivalent |
| Oil Capacity | 5.20 oz |
| Regulated Fuel System Pressure (Without Vacuum) | 54.0-61.0 psi |
| Regulated Fuel System Pressure (With Vacuum) | 46.0-52.0 psi |
| Torque to Knuckle | 41 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Nominal Thickness From | 0.866 in |
| Rotor Nominal Thickness To | 0.866 in |
| Rotor Minimum Machining | 0.787 in |
| Rotor Discard at or Under | 0.768 in |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.