Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Body Lock Cylinders (lubricate) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Hood Latch (lubricate) · Tire & Wheel Assembly (rotate) |
| At 15,000 mi | Engine Air Filter Element (clean) |
| Every 15,000 mi | Brake System (inspect) · Engine Air Filter Element (inspect) |
| Every 22,500 mi | Engine Air Filter Element (clean) |
| Every 30,000 mi | Accessory Drive Belt (inspect) · Axle Shaft Oil Seal (inspect) · Brake Line (inspect) · CV Joint Boot (inspect) · Engine Coolant System (drain, flush & refill) · Engine Coolant System (leak inspection) |
| Every 45,000 mi | Exhaust System Heat Shield (inspect) |
| At 60,000 mi | Engine Air Filter Element (clean) · Engine Coolant System (drain, flush & refill) |
| Every 60,000 mi | Drive Axle Assembly (drain & refill) · Emission Control System (inspect) · Engine Valves (inspect valve lash) · Timing Belt (replace) |