MazdaB26001990Overview/mazda/b2600/1990/base/

1990 Mazda B2600

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1990 B2600.

Transmission Automatic 4-spd

The 1990 Mazda B2600 is EPA-rated at 15/19/17 mpg city/highway/combined.

Model year199219911990

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

EPA fuel economy15/19/17 mpgEPA · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic 4-spd

Dimensions & weight NHTSA vPIC

Overall length193.7 in
Overall width66.9 in
Overall height65.7 in
Wheelbase118.1 in
Curb weight3437 lb
Track (front / rear)56.7 / 56.3 in

Ratings & economy EPA / vPIC

EPA city / highway / combined15 / 19 / 17 mpg
Drivetrain4-Wheel or All-Wheel Drive
Recommended fuelRegular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine 80W-90 · GL-5 in the differential.

Lubricants & capacities

Differential Gear Oil80W-90 · GL-5
Differential Gear Oil Capacity3.2 Pints
Engine CoolantETHYLENE GLYCOL
Power Steering FluidDEXRON OR MERCON V

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 7,500 mi.

Every 7,500 miEngine Oil (drain & refill) · Engine Oil Filter (replace)
At 15,000 miUniversal Vehicle Operation (inspect idle speed)
Every 15,000 miBrake Power Booster Unit (inspect) · Driveshaft U-Joint (lubricate)
Every 30,000 miAccessory Drive Belt (inspect) · Axle Shaft Oil Seal (inspect) · Body Fasteners (torque) · Brake Hydraulic System (drain, refill & bleed) · Brake System (inspect) · CV Joint Boot (inspect)
Every 60,000 miDrive Axle Assembly (drain & refill) · Emission Control System (inspect) · Fuel Filter (replace) · High Altitude Compensator Filter (replace) · Ignition Timing (inspect) · PCV Valve (inspect)
Every 80,000 miOxygen Sensor (replace)

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific B2600. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

What gas mileage does the B2600 get?

EPA figures are 15 city / 19 highway / 17 combined mpg.