Land RoverLR42011Overview/land-rover/lr4/2011/base/

2011 Land Rover LR4

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 LR4.

Body SUVTransmission Automatic (S6)

The 2011 Land Rover LR4 is an SUV equipped with a six-speed automatic transmission and returns an EPA-estimated 13 mpg city, 17 highway, and 14 combined. Its lubrication system requires 8.5 quarts of 5W-20 oil. Reliability data records 22 owner complaints, with the fuel and propulsion system as the top complaint area, and one recall — a profile that suggests a modest overall complaint volume for the model year, though the concentration in propulsion warrants note.

Model year2016201520142013201220112010

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity8.5 qtOEM · verified
Engine oil type5W-20OEM · verified
Lug nut torque103 ft-lbsOEM · verified
EPA fuel economy13/17/14 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 49 · 720 CCA battery, OE oil filter LR011298. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 49 · 720 CCAOEM · verified

OE service part numbers OEM · verified

Engine oil filterLR011298 alt LR011279
Engine air filterLR011593
Fuel filterLR043420
Spark plugLR032080
BatteryLR180618
Front wiper bladesLR154776
Serpentine beltLR012663 alt LR190101
ThermostatLR032135
Cabin air filterLR023977 alt JKR500010

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S6)

Dimensions & weight NHTSA vPIC

Overall length190.9 in
Overall width75.6 in
Overall height78.3 in
Wheelbase113.8 in
Curb weight5853 lb
Track (front / rear)63.8 / 63.8 in
Weight distribution (front / rear)49/51

Ratings & economy EPA / vPIC

EPA city / highway / combined13 / 17 / 14 mpg
Drivetrain4-Wheel Drive
Recommended fuelPremium Gasoline

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the LR4 of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

6.6 sec0–60 mph (tested)quickest 6.60 sec — 2011 HSE
YearTrim / engine0–60¼ mileHPDrivetrain
2011HSE 5.0L V86.60 sec15.10 sec375 hpAWD
2010HSE 5.0L V86.50 sec15.00 sec375 hpAWD
2010HSE 5.0L V86.90 sec15.30 sec375 hpAWD
2015HSE 3.0L Supercharger V66.70 sec15.20 sec340 hpAWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 8.5 qt of 5W-20 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to 17.7 ft-lbs. The firing order is 1-5-4-2-6-3-7-8. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission FluidShell M1375.4
Automatic Transmission Fluid Capacity9.0-11.0
Brake FluidDOT 4
Differential Gear Oil Capacity1.3 Pints
Differential Gear Oil Capacity3.6 Pints
Engine Oil5W-20
Engine Oil Capacity8.5 qt
Engine Oil5W-20

Engine torques

Intake Manifold to Engine Bolts18.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts13.3 ft-lbs
Engine Oil Pan Drain Plug17.7 ft-lbs

Chassis torques

Lug Nuts103 ft-lbs
Transfer Case Fill Plug16.0 ft-lbs
Transfer Case Drain Plug16.0 ft-lbs
Automatic Transmission Drain Plug6.0 ft-lbs
Front Wheel Hub169 ft-lbs
Rear Wheel Hub311 ft-lbs

Ignition

Cylinder Firing Order1-5-4-2-6-3-7-8

Battery & A/C

RefrigerantR134a
Oil GroupPAG
Oil Type46
Standard BCI Group Number49
Standard BCI Cranking Performance720 cca

Service checks

Thermostat Opening Temperature190-194 °F

Brakes

Torque Caliper to Bracket26 ft-lbs
Torque to Knuckle202 ft-lbs / 85 ft-lbs
Minimum Pad Thickness0.118 in
Rotor Runout Limit0.002 in / 0.003 in
Rotor Nominal Thickness From1.181 in / 0.787 in
Rotor Nominal Thickness To1.181 in / 0.787 in
Rotor Discard at or Under1.063 in / 0.708 in

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
1148 ft. lbs., step 2: 180148 ft. lbs
Cylinder Head — tightening sequence 5 stages

Prep Do not reuse old bolts. Coat new bolts with engine oil. Tighten all bolts to finger tight then continue on with the following procedure.

1Bolts 1-1015 ft. lbs
2Bolts 1-1025.8 ft. lbs
3Bolts 1-10120 degrees
4Top larger recessed bolts18 ft. lbs
5Two lower bolts below recessed bolts9 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 15,000 mi; spark plugs at 105,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 15,000 miAccessory Drive Belt (inspect) · Body Latches, Locks & Hinges (inspect) · Brake System (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate) · Engine Oil (drain & refill)
Every 30,000 miEngine Coolant System Hoses (inspect) · Fuel Line (inspect) · Power Steering Line (inspect) · Power Steering System (inspect) · Seat Belt System (inspect) · Suspension System (inspect)
Every 45,000 miBrake Hydraulic System (drain, refill & bleed)
Every 75,000 miDrive Axle Assembly (drain & refill) · Engine Air Filter Element (replace) · Transfer Case Assembly (drain & refill)
Every 90,000 miBrake Line (replace)
At 105,000 miSpark Plugs (replace)
At 150,000 miDrive Belt (replace) · Engine Coolant System (drain, flush & refill) · Transmission Fluid & Filter (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The 2011 Land Rover LR4 saw an increase in consumer complaints, rising to 22 from the 15 reported for the 2010 model. Despite this rise, the federal record shows a stable trend in safety oversight, with both years recording exactly one recall and one investigation. Interestingly, Technical Service Bulletins declined from 338 in 2010 to 276 in 2011. For the 2011 model, the most prevalent issues involve the Fuel/Propulsion System (6) and Fuel System, Gasoline (4), though the data does not specify the root causes of these failures. The record also notes one crash complaint and one fire complaint for the target year. Given the increase in complaints and the concentration of fuel-related issues, this is a less desirable year to buy than the 2010 model.

1
Open recalls
NHTSA campaigns
276
Service bulletins
Manufacturer communications
1
ODI investigations
Office of Defects Investigation
22
Owner complaints
1 involved a crash · 1 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Rollover★★★★

Owner complaints filed with NHTSA, by component

All 22 complaints on record, top 8 components.

Fuel/Propulsion System6
Fuel System, Gasoline4
Engine & Engine Cooling2
Electrical System2
Unknown Or Other,Engine,Fuel/Propulsion System1
Vehicle Speed Control1
Parking Brake,Fuel System, Gasoline1
Parking Brake,Service Brakes1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

21V635000Fuel System, Gasoline:Delivery:Fuel Pump:Mounting Plate/FlangeReported 12/08/2021

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2010-2013 Range Rover Sport and 2010-2016 LR4 vehicles equipped with 3.0L V6 or 5.0L V8 engines. The fuel outlet flange mounted on the fuel tank may… Remedy: Dealers will replace the fuel outlet flange, free of charge. Interim owner notification letters were mailed October 7, 2021. Owner notification letters were mailed May 11, 2022…

Technical service bulletins NHTSA · verified

Showing 5 of 276 bulletins on record with NHTSA.

BulletinDateComponentSummary
LTB00552NAS32021-01-25EquipmentRESCINDED - Windshield Wiper Noise / Judder / Streak - RESCINDED
LTB00766NAS52020-12-04EquipmentDamage/marking may be evident on the surface of the Instrument Cluster (IPC) lens.
LTB00660NAS32020-10-05StructureThe front and/or rear parking aid system may be inoperative.
SFCC-APRIL19-Sli2019-04-11Equipment Adaptive/MobilityPCV DiaphramTorn. The Check Engine Lamp is illuminated.
LTB00766NAS42019-04-09Electrical SystemDamage/marking may be evident on the surface of the IPC (Instrument Cluster) lens.

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific LR4. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2011 LR4 take?

8.5 qt of 5W-20 MEETING LAND ROVER SPECIFICATION WSS-M2C925A, per the factory manual.

Does the 2011 LR4 have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the LR4 get?

EPA figures are 13 city / 17 highway / 14 combined mpg.