Land RoverDefender 1102020Overview/land-rover/defender-110/2020/base/

2020 Land Rover Defender 110

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2020 Defender 110.

Transmission Automatic (S8)

The 2020 Land Rover Defender 110 is EPA-rated at 17/20/18 mpg city/highway/combined.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

EPA fuel economy17/20/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 49 AGM VRLA battery is required. Battery is vented to the outside. · 850 CCA battery, OE oil filter LR133457. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 49 AGM VRLA battery is required. Battery is vented to the outside. · 850 CCAOEM · verified
Tire sizeP255/70R18, P255/65R19, P255/60R20, P275/45R22OEM · verified
Wheel / rim8, 8, 8.5, 8.5 inOEM · verified

OE service part numbers OEM · verified

Engine oil filterLR133457 alt LR073868
Engine air filterLR129322
Spark plugLR178881
Battery429123482
Front wiper bladesLR162053
ThermostatLR106640 alt LR180316
Cabin air filterLR171252 alt LR133345

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S8)

Dimensions & weight NHTSA vPIC

Overall length187.4 in
Overall width79.1 in
Overall height77.6 in
Wheelbase118.9 in
Curb weight4819 lb
Track (front / rear)67.3 / 66.9 in
Weight distribution (front / rear)49/51

Ratings & economy EPA / vPIC

EPA city / highway / combined17 / 20 / 18 mpg
Drivetrain4-Wheel Drive
Recommended fuelPremium Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Battery & A/C

Standard BCI Group Number49
Standard BCI Cranking Performance850 cca

Multi-step torque procedures OEM · verified

Torque — tightening sequence 1 stages
12.9 ft. lbs., Step 2: 51.7 ft. lbs., Step 3: 103.02.9 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
127.0 ft. lbs., Step 2: 90°27 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
1148.0 ft. lbs., Step 2: 270° - Note markings on crankshaft bolt. If bolt head shows 10.9 remove the bolt counterclockwise. If the bolt shows 12.9 remove the bolt clockwise.148 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 21,000 mi; spark plugs every 63,000 mi; coolant at 105,000 mi. The big-interval services (at 105,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 21,000 miBrake Hydraulic System (drain, refill & bleed) · Cabin Air Filter (replace) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Instrument Cluster Warning Indicator (inspect) · Universal Vehicle Operation (road test)
Every 42,000 miEngine Air Filter Element (replace)
Every 63,000 miBrake Line (replace) · Drive Axle Assembly (drain & refill) · Hybrid Battery Compartment Air Filter (replace) · Spark Plugs (replace) · Transfer Case Assembly (drain & refill)
At 105,000 miDrive Belt (replace) · Engine Coolant System (drain, flush & refill) · Transmission Fluid & Filter (replace)

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Defender 110. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

What gas mileage does the Defender 110 get?

EPA figures are 17 city / 20 highway / 18 combined mpg.