JeepJ201987Overview/jeep/j20/1987/base/

1987 Jeep J20

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1987 J20.

Transmission Automatic 3-spd

The 1987 Jeep J20 takes 4 qt w/ filter of 20W-40 engine oil and is EPA-rated at 10/12/11 mpg city/highway/combined.

Model year19881987

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity4 qt w/ filterOEM · verified
Engine oil type20W-40 / 20W-50 / 10W-30 APIOEM · verified
EPA fuel economy10/12/11 mpgEPA · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic 3-spd

Ratings & economy EPA / vPIC

EPA city / highway / combined10 / 12 / 11 mpg
Drivetrain4-Wheel or All-Wheel Drive
Recommended fuelRegular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 4 qt w/ filter of 20W-40 / 20W-50 / 10W-30 API engine oil, Front: 75W- in the differential.

Lubricants & capacities

Differential Gear OilFront: 75W-
Differential Gear Oil Capacity6 Pints
Engine CoolantETHYLENE GLYCOL
Engine Oil20W-40 · 20W-50 · API · 10W-30 · 10W-40 · 5W-30
Engine Oil Capacity4 qt w/ filter
Power Steering FluidMS-5931

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 22,500 mi. The big-interval services (every 22,500 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

At 7,500 miAccessory Drive Belt (inspect)
Every 7,500 miBattery (inspect electrolyte level) · Brake Hydraulic System (inspect fluid level) · Clutch Master Cylinder (inspect fluid level) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Exhaust System (Complete) (inspect)
Every 15,000 miAccessory Drive Belt (inspect)
Every 22,500 miEngine Coolant System (drain, flush & refill)
Every 30,000 miAir Cleaner Manifold Heat Control Actuator (inspect) · Bands (adjust) · Body Fasteners (torque) · Body Latches, Locks & Hinges (inspect) · Brake System (inspect) · Choke System (inspect)

Owner how-tos

Condensed service procedures for routine maintenance. Procedures that require dealer diagnostic equipment are identified and summarized only.

Common procedures

Key fob — remote (RKE) programming programming new fob buttons Dealer tool OEM · verified
Tool requiredDRBIII scan tool (dealer / locksmith)
WhyTransmitter codes are written into the receiver in the passenger door module
Anti-theft (SKIS) — module initialization after immobilizer module replacement Dealer tool OEM · verified
When neededAfter Sentry Key Immobilizer Module (SKIM) replacement
Tool requiredDRBIII scan tool
Also requiredThe vehicle's four-digit PIN code

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific J20. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 1987 J20 take?

4 qt w/ filter of ABOVE 30 degrees F: 20W-40 OR 20W-50 API, ABOVE 0 degrees F: 10W-30 OR 10W-40 API, BELOW 60 degrees F: 5W-30 API, per the factory manual.

What gas mileage does the J20 get?

EPA figures are 10 city / 12 highway / 11 combined mpg.