Jaguar›XJR575›2019›Overview/jaguar/xjr575/2019/base/

2019 Jaguar XJR575

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2019 XJR575.

The 2019 Jaguar XJR575 takes 7.7 qt of 0W-20 engine oil.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity7.7 qtOEM · verified

Engine oil type0W-20OEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter AJ812279. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

OE service part numbers OEM · verified

Engine oil filter	AJ812279 alt AJ811453
Engine air filter	C2Z15037
Spark plug	C2P23089
Battery	429123482
Front wiper blades	C2D60832
Cabin air filter	C2Z6525

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 7.7 qt of 0W-20 engine oil, Dot 4 brake fluid. The firing order is 1-2-7-3-4-5-6-8.

Lubricants & capacities

Brake Fluid	Dot 4
Engine Oil	0W-20
Engine Oil Capacity	7.7 qt

Engine torques

Camshaft Bearing/Carrier Cap Bolts or Studs	106 inch lbs. ft-lbs
Intake Manifold to Engine Bolts	18 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	13.3 ft-lbs
Oil Pump to Cylinder BLock Bolts/Studs	6mm

Ignition

Cylinder Firing Order

1-2-7-3-4-5-6-8

Service checks

Regulated Fuel System Pressure (Without Vacuum)	65.0 Low pressure side. psi
Regulated Fuel System Pressure (With Vacuum)	65.0 Low pressure side. psi
RPM	65.0 @ start up. Low pressure side. rpm
Engine Compression	Cranking Speed

Brakes

ABS Sensor Torque

Front: 6.0; Rear: 6.0

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

84 inch lbs., Step 2: 37

84 in

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

148.0 ft. lbs., Step 2: 270

148 ft. lbs

Engine Flywheel Bolts — tightening sequence 1 stages

33 ft. lbs., Step 2: 90°.

33 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 16,000 mi; spark plugs every 96,000 mi; coolant at 160,000 mi. The big-interval services (at 160,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 16,000 mi	Engine Oil (drain & refill) · Engine Oil Filter (replace) · Sunroof Assembly (lubricate) · Universal Vehicle Operation (road test)
Every 32,000 mi	Cabin Air Filter (replace)
Every 48,000 mi	Brake Hydraulic System (drain, refill & bleed) · Engine Air Filter Element (replace)
Every 96,000 mi	Spark Plugs (replace)
At 144,000 mi	Drive Axle Assembly (drain & refill) · Drive Belt (replace) · Transmission Assembly (drain & refill)
At 160,000 mi	Engine Coolant System (drain, flush & refill)