2007 Jaguar Vanden Plas

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2007 Vanden Plas.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Lug nut torque75 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 93 · 680 CCA battery, OE oil filter C2C41611. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 93 · 680 CCAOEM · verified

OE service part numbers OEM · verified

Engine oil filter	C2C41611 alt NCE1842AA
Engine air filter	AJ82766
Fuel filter	C2C35417
Spark plug	C2A1535
Battery	C2D61169
Front wiper blades	XR858025 alt XR858033
Serpentine belt	AJ82878
Thermostat	AJ83525 alt AJ811788
Cabin air filter	C2C6884

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	206.3 in
Overall width	71.7 in
Overall height	57.5 in
Wheelbase	124 in
Curb weight	3803 lb
Track (front / rear)	61.4 / 61 in
Weight distribution (front / rear)	52/48

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine SYNTHETIC · 75W-140 · GL-5 in the differential, DOT 4 brake fluid. Torque lug nuts to 75 ft-lbs. The firing order is 1-2-7-3-4-5-6-8.

Lubricants & capacities

Brake Fluid	DOT 4
Differential Gear Oil	SYNTHETIC · 75W-140 · GL-5
Differential Gear Oil Capacity	2.7 Pints
Power Steering Fluid	ATF

Engine torques

Oil Pump to Cylinder BLock Bolts/Studs

9-10 ft-lbs

Chassis torques

Lug Nuts

75 ft-lbs

Ignition

Cylinder Firing Order

1-2-7-3-4-5-6-8

Battery & A/C

Standard BCI Group Number	93
Standard BCI Cranking Performance	680 cca

Brakes

Brake Application	WITH BREMBO BRAKES / WITH STANDARD BRAKES
Torque Caliper to Bracket	156 ft-lbs
Torque to Knuckle	76 ft-lbs
Minimum Pad Thickness	0.078 in
Brake Application	WITH BREMBO BRAKES / WITH STANDARD BRAKES
Rotor Runout Limit	0.003 in / 0.002 in
Rotor Nominal Thickness From	1.256 in / 0.591 in / 1.181 in / 0.787 in
Rotor Nominal Thickness To	1.256 in / 0.591 in / 1.181 in / 0.787 in

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

1

8 ft. lbs., Step 2: 22 ft. lbs., Step 3: 90

8 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 100,000 mi.

Every 10,000 mi	Accessory Drive Belt (inspect) · Battery (inspect electrolyte level) · Brake Hydraulic System (inspect fluid level) · Brake Linings (inspect) · Brake Rotor (inspect) · Engine Coolant System (inspect fluid level)
Every 20,000 mi	Cabin Air Filter (replace)
Every 40,000 mi	Engine Air Filter Element (replace)
Every 60,000 mi	Fuel Filter (replace)
Every 100,000 mi	Spark Plugs (replace)
At 150,000 mi	Drive Belt (replace)