HondaPrelude1980Overview/honda/prelude/1980/base/

1980 Honda Prelude

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1980 Prelude.

The 1980 Honda Prelude is the subject of this overview, though the provided model complaint history data covers only the years 1990 through 2006. Within that tracked period, complaints ranged from a low of 4 in 1990 to a highest count of 74 in 1997. Consequently, the 1980 model year sits outside this documented reliability history, meaning its specific standing relative to the later peak complaint years is not quantified by the available figures.

Model year200120001999199819971996199519941980

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length159.4 in
Overall width65 in
Overall height49.2 in
Wheelbase90.2 in
Curb weight2132 lb

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the Prelude of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

8.6–10.7 sec0–60 mph (tested)quickest 8.60 sec — 1989 Si Coupe
YearTrim / engine0–60¼ mileHPDrivetrain
1985Coupe 1.8L I-410.70 sec16.80 sec100 hpFWD
1988Si 4WS Coupe 2.0L I-49.00 sec17.00 sec135 hpFWD
1988Si 4WS Coupe 2.0L I-49.30 sec16.80 sec135 hpFWD
1989Si Coupe 2.0L I-48.60 sec16.50 sec135 hpFWD

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

1
Open recalls
NHTSA campaigns
0
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
0
Owner complaints
0 involved a crash · 0 a fire
Owner complaints by model year NHTSA · this generation & adjacent

No owner complaints on record with NHTSA for this vehicle.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

84V086000Structure:Frame And MembersReported 18/07/1984

THE SPRINGS ARE HELD UP BY A METAL SUPPORT AROUND EACH SHOCK ABSORBER. VEHICLES DRIVEN REGULARLY IN AREAS WHERE ROADS ARE SALTED DURING WINTERTIME ARE SUBJECT TO RUSTING OF THESE SUPPORTS. RUSTING MAY EVENTUALLY ALLOW… Remedy: THE SPRING SUPPORTS AND SHOCKS WILL BE INSPECTED; DEPENDING ON CONDITION, THE COMPONENTS WILL BE RUSTPROOFED OR REPLACED, IF NECESSARY.

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Prelude. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

Does the 1980 Prelude have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.