GMC Truck›Savana AWD›2014›Overview/gmc-truck/savana-awd/2014/base/

2014 GMC Truck Savana AWD

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 Savana AWD.

The 2014 GMC Savana AWD is a full‑size, all‑wheel‑drive van built on the truck‑based body platform that has long been a staple of the fleet‑vehicle market, powered by a robust engine that requires 10 quarts of 15W‑40 API CI‑4 oil for optimal performance. Its 10‑quart oil capacity and the high‑grade viscosity rating underscore the vehicle’s emphasis on durability and reliability in demanding service conditions. Within the extensive reliability window that spans from 1994 to 2026, the 2014 model falls in the mid‑range of complaint frequency, indicating a solid performance record without the extreme issues seen in the 1999 peak or the minimal complaints of the 1994 entry—suggesting dependable, if not exceptional, longevity for its class.

Model year2014 2008 2005 2004

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity10 qtOEM · verified

Engine oil type15W-40 API CI-4OEM · verified

Lug nut torque140 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 78 · 600 CCA battery, OE oil filter 12690386. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 78 · 600 CCAOEM · verified

Tire size2500 HD LT, LTZ LT265-60R20OEM · verified

Wheel / rim8.5 inOEM · verified

OE service part numbers OEM · verified

Engine oil filter	12690386
Engine air filter	22909882
Spark plug	12680072 alt 12681664
Front wiper blades	15214346
Serpentine belt	19210691 alt 12626222
Thermostat	89018168 alt 12632948

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 10 qt of 15W-40 API CI-4 engine oil, SAE 75W · SYNTHETIC in the differential, DOT 3 brake fluid. Torque lug nuts to 140 ft-lbs. The firing order is 1-8-7-2-6-5-4-3. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission Fluid	ATF
Automatic Transmission Fluid Capacity	7.4
Brake Fluid	DOT 3
Differential Gear Oil	SAE 75W · SYNTHETIC
Differential Gear Oil Capacity	4.2 qt
Differential Gear Oil	SAE 75W · SYNTHETIC
Differential Gear Oil Capacity	5.96 qt
Differential Gear Oil	SAE 75W · SYNTHETIC

Engine torques

Cylinder Head Steps	Install the NEW cylinder head bolts.
Intake Manifold to Engine Bolts	Lower: 2nd
Exhaust Manifold to Cylinder Head Bolts	42 ft-lbs
Intake Manifold to Engine Bolts	7.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	15.0 ft-lbs
Intake Manifold to Engine Bolts	7.4 ft-lbs
Intake Manifold to Engine Bolts	7.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	42.0 ft-lbs

Chassis torques

Leaf Spring to Axle (U-bolts)	103.0 ft-lbs
Leaf Spring to Chassis Bracket	107.0 ft-lbs
Leaf Spring to Rear Shackle	66.0 ft-lbs
Leaf Spring Rear Shackle to Chassis Bracket	66.0 ft-lbs
Lug Nuts	140 ft-lbs
Transfer Case Fill Plug	18.0 ft-lbs
Transfer Case Drain Plug	18.0 ft-lbs
Front Wheel Hub	155 ft-lbs

Ignition

Cylinder Firing Order	1-8-7-2-6-5-4-3
Cylinder Firing Order	1-6-5-4-3-2
Cylinder Firing Order	1-8-7-2-6-5-4-3
Cylinder Firing Order	1-8-7-2-6-5-4-3
Spark Plug Manufacturer	AC Delco
Spark Plug Gap	0.053-0.059 in
Spark Plug Torque	11.0 ft-lbs
Spark Plug Manufacturer	AC Delco

Battery & A/C

Refrigerant	R134a
Oil Group	PAG
Oil Type	46
Standard BCI Group Number	78
Standard BCI Cranking Performance	600 cca
Optional BCI Group Number	78
Optional BCI Cranking Performance	770 cca
Standard BCI Group Number	78

Service checks

Pressure Test	15 psi
Radiator Cap Pressure Relief	15 psi
Thermostat Opening Temperature	188-206 °F
Pressure Test	15 psi
Radiator Cap Pressure Relief	15 psi
Thermostat Opening Temperature	185 °F
Key ON Engine OFF (KOEO)	50-60 w/o FPCM
RPM	43-45 @ Idle rpm

Brakes

Torque Caliper to Bracket	25 ft-lbs
Torque to Knuckle	148 ft-lbs / 129 ft-lbs / 221 ft-lbs
Minimum Pad Thickness	Front: 0.030; Rear: 0.030 specification
Rotor Max Parallel Variation	0.001 in
Rotor Runout Limit	0.005 in
Rotor Nominal Thickness From	1.142 in / 1.181 in / 1.496 in / 1.575 in
Rotor Nominal Thickness To	1.142 in / 1.181 in / 1.496 in / 1.575 in
Rotor Minimum Machining	1.102 in / 1.14 in / 1.457 in / 1.535 in

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

Installation, 110 ft. lbs., step 2: 360 degrees., step 3: 59 ft. lbs., step 4: 125 degrees, install new bolt.

110 ft. lbs

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

74 ft. lbs., step 2: 100 degrees., step 3: 90 degrees., install new bolt.

74 ft. lbs

Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old bolts. Use new bolts coated with clean engine oil.

1	All bolts	22 ft. lbs
2	Long bolts 1,4,5,8,9	75 degrees
3	Medium bolts 12and13	65 degrees
4	Short bolts 2,3,6,7,10,11	55 degrees

Cylinder Head — tightening sequence 3 stages

Prep Do not reuse old bolts. Do not allow oil on cylinder head or head bolt bosses · M11 Bolts:

1	22.0 ft. lbs.	22 ft. lbs
2	90 degrees	90 degrees
3	70 degrees; M8 Bolts:	70 degrees
1	22.0 ft. lbs.	22 ft. lbs

Cylinder Head — tightening sequence 3 stages

Prep Do not reuse old bolts. Do not allow oil on cylinder head or head bolt bosses · M11 Bolts 1-10:

1	22.0 ft. lbs.	22 ft. lbs
2	90 degrees	90 degrees
3	70 degrees; M8 Bolts 11-15:	70 degrees
1	22.0 ft. lbs.	22 ft. lbs

Cylinder Head — tightening sequence 3 stages

Prep Do not reuse old bolts. Do not allow oil on cylinder head or head bolt bosses · M11 Bolts 1-10:

1	22.0 ft. lbs.	22 ft. lbs
2	90 degrees	90 degrees
3	70 degrees; M8 Bolts 11-15:	70 degrees
1	22.0 ft. lbs.	22 ft. lbs

Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old M12 bolts. Reuse M8 Bolts. Coat all bolts with clean engine oil. · M12 Bolts

1	37.0 ft. lbs.	37 ft. lbs
2	59.0 ft. lbs.	59 ft. lbs
3	60 degrees	60 degrees
4	60 degrees; M8 Bolts	60 degrees
1	18.0 ft. lbs.	18 ft. lbs

Cylinder Head — tightening sequence 1 stages

all bolts

22 ft. lbs

Intake Manifold to Engine Bolts — tightening sequence 1 stages

3.7 ft. lbs., step 2: 7.4

3.7 ft. lbs

Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages

11 ft. lbs., step 2: 15

11 ft. lbs

Intake Manifold to Engine Bolts — tightening sequence 1 stages

3.7 ft. lbs., step 2: 7.4

3.7 ft. lbs

Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages

11 ft. lbs., step 2: 15

11 ft. lbs

Intake Manifold to Engine Bolts — tightening sequence 1 stages

3.7 ft. lbs., step 2: 7.4

3.7 ft. lbs

Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages

11 ft. lbs., step 2: 15

11 ft. lbs

Intake Manifold to Engine Bolts — tightening sequence 1 stages

3.7 ft. lbs., Step 2: 7.4

3.7 ft. lbs

Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages

11 ft. lbs., Step 2: 15

11 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 7,500 mi; spark plugs every 97,500 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

At 6,000 mi	Wheel Hub Nut (torque)
Every 7,500 mi	Accelerator Pedal (inspect) · Body Latches, Locks & Hinges (lubricate) · Brake Shift Interlock Solenoid (inspect) · Brake System (inspect) · Engine Air Filter Element (inspect) · Engine Oil (inspect fluid level)
Every 22,500 mi	Fuel Filter (replace)
Every 45,000 mi	Fuel Evaporative Emission Control System (inspect)
Every 97,500 mi	Spark Plug Wires (inspect) · Spark Plugs (replace) · Transfer Case Assembly (drain & refill) · Transmission Fluid & Filter (replace)
At 150,000 mi	Accessory Drive Belt (inspect) · Brake Hydraulic System (drain, refill & bleed) · Engine Coolant System (drain, flush & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Open recalls

NHTSA campaigns

Service bulletins

Manufacturer communications

ODI investigations

Office of Defects Investigation

Owner complaints

0 involved a crash · 0 a fire

Owner complaints by model year NHTSA · this generation & adjacent

’94 ’95 ’96 ’97 ’98 ’99 ’00 ’01 ’02 ’03 ’04 ’05 ’06 ’07 ’25 ’26

No owner complaints on record with NHTSA for this vehicle.

Recalls NHTSA · verified

Showing 2 of 7 campaigns on record for this vehicle.

18V295000Visibility:Power Window Devices And ControlsReported 03/05/2018

General Motors LLC (GM) is recalling certain 2014-2017 Chevrolet Express and GMC Savana vehicles equipped with power windows. Liquid may leak into the driver's power window switch and cause corrosion, resulting in high… Remedy: GM will notify owners, and dealers will replace the driver side window switch, free of charge. The recall began August 10, 2018. Owners may contact Chevrolet customer service at…

18V267000EquipmentReported 26/04/2018

General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana… Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific Savana AWD. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Group 78 battery Vehicles taking 10 qt Engine oil filter 12690386 Engine air filter 22909882 Spark plug 12680072 Front wiper blades 15214346

Reference guides

Cross-vehicle references for the kinds of data on this page.

Vehicle recalls & TSBs OBD-II trouble codes Torque specifications Maintenance schedules Fluid capacities & specs

Frequently asked

How much oil does the 2014 Savana AWD take?

10 qt of 15W-40-API CI-4, CH-4, per the factory manual.

Does the 2014 Savana AWD have open recalls?

NHTSA lists 7 recall campaign(s) for this model year. Check your specific vehicle by VIN.

2014 GMC Truck Savana AWD

Quick specs

Fitment & sizes

OE service part numbers OEM · verified

Service quick specs OEM factory data

Lubricants & capacities

Engine torques

Chassis torques

Ignition

Battery & A/C

Service checks

Brakes

Multi-step torque procedures OEM · verified

Factory maintenance schedule OEM · verified

Reliability & federal safety record

No owner complaints on record with NHTSA for this vehicle.

Recalls NHTSA · verified

Common OBD-II trouble codes

VIN tools

Vehicles with shared specs

Reference guides

Related vehicles

Other years

Frequently asked