GMC TruckK25001984Overview/gmc-truck/k2500/1984/base/

1984 GMC Truck K2500

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1984 K2500.

The 1984 GMC Truck K2500 is a truck platform whose engine specifications dictate a 5-quart oil capacity utilizing viscosities of 20W-20, 15W-40, or 5W-30. While specific complaint data for the 1984 model is not detailed, the broader model complaint history spanning 1990 to 1996 demonstrates a strong baseline of reliability, hitting a low of just one complaint in 1992. Consequently, the 1984 model year sits at the early, reliable end of this documented timeline, representing a period of proven dependability before the platform eventually experienced its highest complaint volume of 25 in 1996.

Model year1988198419821980

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity5 qtOEM · verified
Engine oil type20W-20 / 15W-40 / 5W-30OEM · verified

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 5 qt of 20W-20 / 15W-40 / 5W-30 engine oil, 80W-90 · GL-5 in the differential, DOT 3 brake fluid.

Lubricants & capacities

Brake FluidDOT 3
Differential Gear Oil80W-90 · GL-5
Differential Gear Oil Capacity4.2 qt
Differential Gear Oil80W-90 · GL-5
Differential Gear Oil Capacity27.0 qt
Engine CoolantETHYLENE GLYCOL
Engine Oil20W-20 · 15W-40 · 5W-30
Engine Oil Capacity5 qt

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

1
Open recalls
NHTSA campaigns
0
Service bulletins
Manufacturer communications
1
ODI investigations
Office of Defects Investigation
0
Owner complaints
0 involved a crash · 0 a fire
Owner complaints by model year NHTSA · this generation & adjacent

No owner complaints on record with NHTSA for this vehicle.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

07E088000EquipmentReported 24/10/2007

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS… Remedy: HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific K2500. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 1984 K2500 take?

5 qt of ABOVE 40 degrees F: 30, ABOVE 20 degrees F: 20W-20, ABOVE 10 degrees F: 15W-40, BELOW 60 degrees F: 5W-30, per the factory manual.

Does the 1984 K2500 have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.