Ford›Mustang›1995›Overview/ford/mustang/1995/base/

1995 Ford Mustang

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1995 Mustang.

Body PASSENGER CAR

The 1995 Ford Mustang is a passenger car that utilizes 4.0 quarts of 5W-20 API engine oil. This model year is associated with 16 recalls and 701 total owner complaints, with the primary issues concentrated in the engine and engine cooling systems. Positioned within a model complaint history spanning 1990 to 2026, the 1995 iteration falls between the series high of 868 complaints in 2005 and the low of 4 complaints in 2026.

Model year2025 2024 2023 2022 2021 2020 2019 2018 1995

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity4.0 qtOEM · verified

Engine oil type5W-20 APIOEM · verified

Lug nut torque85-105 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 58 · 540 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 58 · 540 CCAOEM · verified

Tire sizeP205-65TR15OEM · verified

Wheel / rim8-JJ inOEM · verified

OE service part numbers OEM · verified

Thermostat

RT1084 alt RT1087

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	181.5 in
Overall width	71.7 in
Overall height	52.8 in
Wheelbase	101.2 in
Curb weight	2961 lb
Track (front / rear)	60.6 / 59.1 in

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the Mustang of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

6.8 sec0–60 mph (tested)quickest 6.80 sec — 1995 GTS Coupe

Year	Trim / engine	0–60	¼ mile	HP	Drivetrain
1995	GTS Coupe 5.0L V8	6.80 sec	15.10 sec	215 hp	RWD
1994	GT Coupe 5.0L V8	6.10 sec	14.90 sec	215 hp	RWD
1994	GT Coupe 5.0L V8	6.70 sec	15.10 sec	215 hp	RWD
1994	GT Coupe 5.0L V8	6.70 sec	15.20 sec	215 hp	RWD
1994	GT Coupe 5.0L V8	6.90 sec	15.40 sec	215 hp	RWD
1994	GT Convertible 5.0L V8	7.80 sec	15.90 sec	215 hp	RWD
1994	V6 Coupe 3.8L V6	8.30 sec	16.50 sec	145 hp	RWD
1994	V6 Coupe 3.8L V6	9.90 sec	16.80 sec	145 hp	RWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 4.0 qt of 5W-20 API engine oil, 80W-90 in the differential, DOT 3 brake fluid. Torque lug nuts to 85-105 ft-lbs, the oil drain plug to 15.0-25.0 ft-lbs. The firing order is 1-3-7-2-6-5-4-8. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake Fluid	DOT 3
Differential Gear Oil	80W-90
Differential Gear Oil Capacity	3.75 Pints
Engine Oil	SYNTHETIC · 5W-20 · API
Engine Oil Capacity	4.0 qt
Engine Oil	SYNTHETIC · 5W-20 · API
Engine Oil Capacity	4.0 qt
Engine Oil	SYNTHETIC · 5W-20 · API

Engine torques

Oxygen (O2S) Sensor Bolt(s)	28.0-33.0 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	18 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	26-32 ft-lbs
Oil Pan to Block Bolts	6.6-8.8 ft-lbs
Oil Pan to Block Bolts	6.0-9.0 ft-lbs
Engine Oil Pan Drain Plug	19.0 ft-lbs
Engine Oil Pan Drain Plug	15.0-25.0 ft-lbs
Engine Oil Pan Drain Plug	15.0-25.0 ft-lbs

Chassis torques

Lug Nuts

85-105 ft-lbs

Ignition

Cylinder Firing Order	1-4-2-5-3-6
Cylinder Firing Order	1-3-7-2-6-5-4-8
Spark Plug Manufacturer	Motorcraft
Spark Plug Gap	0.052-0.056 in
Spark Plug Torque	5.0-11.0 ft-lbs
Spark Plug Manufacturer	Motorcraft
Spark Plug Gap	0.052-0.056 in
Spark Plug Torque	7.0-15.0 ft-lbs

Battery & A/C

Refrigerant	R134a
Refrigerant Capacity	2.13 lbs
Oil Group	PAG
Oil Type	YN-12-D
Oil Capacity	7.00-11.00 oz
Standard BCI Group Number	58
Standard BCI Cranking Performance	540 cca
Standard BCI Group Number	58

Service checks

Pressure Test	16 psi
Radiator Cap Pressure Relief	16 psi
Thermostat Opening Temperature	196 °F
Pressure Test	13 psi
Radiator Cap Pressure Relief	13 psi
Pressure Test	13 psi
Radiator Cap Pressure Relief	13 psi

Brakes

Torque Caliper to Bracket	65 ft-lbs / 23-26 ft-lbs
Torque to Knuckle	96 ft-lbs / 65-87 ft-lbs
Minimum Pad Thickness	Front: 0.040; Rear: 0.125 in
Rotor Max Parallel Variation	0.0004 in / 0.0003 in
Rotor Runout Limit	0.004 in / 0.002 in
Rotor Nominal Thickness From	1.03 in / 0.55 in
Rotor Nominal Thickness To	1.03 in / 0.55 in
Rotor Minimum Machining	0.97 in / 0.5 in

Multi-step torque procedures OEM · verified

Cylinder Head — tightening sequence 3 stages

1	14 ft. lbs.	14 ft. lbs
2	29 ft. lbs.	29 ft. lbs
3	36 ft. lbs.; Perform following 3 steps on each bolt; before moving to next bolt in sequence	36 ft. lbs
1	loosen 2-3 turns
2	if long bolt	30–37 ft. lbs
3	turn 175-185 degrees; Proceed to next bolt in sequence	175–185 degrees

Cylinder Head — tightening sequence 2 stages

1	35-40 ft. lbs.	35–40 ft. lbs
2	56-60

Intake Manifold to Engine Bolts — tightening sequence 1 stages

8 ft. lbs., step 2: 16 ft lbs., step 3: 23-25

8 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 5,000 mi; spark plugs every 60,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

At 5,000 mi	Tire & Wheel Assembly (rotate)
Every 5,000 mi	Clutch Pedal Assembly (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace)
Every 10,000 mi	Tire & Wheel Assembly (rotate)
Every 15,000 mi	Engine Coolant System (leak inspection) · Steering Linkage (inspect) · Suspension System (inspect)
Every 30,000 mi	Brake Linings (inspect) · Engine Air Filter Element (replace) · Engine Breather Filter (replace) · Engine Coolant System (drain, flush & refill) · Exhaust System Heat Shield (inspect)
At 50,000 mi	Engine Coolant System (drain, flush & refill)
Every 60,000 mi	Accessory Drive Belt (inspect) · PCV Valve (replace) · Spark Plugs (replace)
Every 100,000 mi	Drive Axle Assembly (drain & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The 1995 Ford Mustang sits at the crest of a sharp spike in the federal record: with 701 complaints and 16 recalls, it outpaces 1994 (440 complaints, 13 recalls) and the immediately following 1996 (331 complaints, 12 recalls). The broader arc for this generation shows low, stable reports from 1990–1993 (78–132 complaints and 5–7 recalls annually), a dramatic jump with the 1994 redesign, a clear 1995 peak, then a steep drop in 1996–1997 and a gradual decline through the early 2000s. That positioning makes 1995 the highest-burden year in the generation for both owner complaints and safety recalls. The 1995 complaints are heavily concentrated in Engine & Engine Cooling (311), followed by Power Train (47), Electrical System (33), and Suspension (32); the year also recorded 59 crash-related and 30 fire-related complaints, though the data does not specify root causes. For a buyer, 1995 is not a favorable choice within this generation: it combines the highest complaint volume, the most recalls, and the largest engine-cooling complaint cluster of the 1990s run.

Open recalls

NHTSA campaigns

160

Service bulletins

Manufacturer communications

ODI investigations

Office of Defects Investigation

701

Owner complaints

59 involved a crash · 30 a fire

Owner complaints by model year NHTSA · this generation & adjacent

’90 ’91 ’92 ’93 ’94’95’96 ’97 ’98 ’99 ’00 ’01 ’02 ’03 ’04 ’05 ’06 ’07 ’08 ’09 ’10 ’11 ’12 ’13 ’14 ’15 ’16 ’17 ’18 ’19 ’20 ’21 ’22 ’24 ’25 ’26

Owner complaints filed with NHTSA, by component

All 701 complaints on record, top 8 components.

Engine & Engine Cooling311

Power Train47

Electrical System33

Suspension32

Air Bags25

Service Brakes, Hydraulic25

Steering22

Structure19

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 16 campaigns on record for this vehicle.

08E050000Exterior Lighting:HeadlightsReported 11/08/2008

K2 MOTOR IS RECALLING 1,921 AFTERMARKET HEADLAMPS OF VARIOUS MODELS SOLD FOR USE ON THE ABOVE LISTED VEHICLES. THESE HEADLAMPS ARE MISSING THE AMBER SIDE REFLEX REFLECTOR WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF… Remedy: K2 MOTOR WILL NOTIFY OWNERS AND OFFER A FULL REFUND. THE RECALL BEGAN ON DECEMEBER 17, 2008. OWNERS MAY CONTACT K2 MOTOR AT 1-909-839-2992.

09E025000Exterior Lighting:HeadlightsReported 11/05/2009

DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE… Remedy: DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT…

Technical service bulletins NHTSA · verified

Showing 5 of 160 bulletins on record with NHTSA.

Bulletin	Date	Component	Summary
4102	2003-10-30	Engine And Engine Cooling	EBP SOLENOID SERVICE SEPARATELY FROM TURBO. SPECIAL SERVICE MESSAGE. MAKE/MODEL UNKNOWN…
03181	2003-09-15	Electrical System	REMOTE KEYLESS ENTRY (RKE) - SERVICE TIPS. *TT
16714	2003-03-01	Engine And Engine Cooling	FOR ALL OBDI VEHICLES THAT USE THE .5V DPFE SENSOR, A 1.0V SENSOR IS CURRENTLY THE ONLY…
03261	2003-01-05	Power Train	NEW SERVICE PART - NUMBER 5 NEEDLE BEARING AND RACE KIT - 4R70W TRANSMISSION - SERVICE…
02208	2002-10-14	Equipment	CLIMATE CONTROL A/C SERVICE TECH TIPS. *EH

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific Mustang. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Group 58 battery Vehicles taking 4.0 qt Thermostat RT1084

Reference guides

Cross-vehicle references for the kinds of data on this page.

Vehicle recalls & TSBs OBD-II trouble codes Torque specifications Maintenance schedules Fluid capacities & specs

Frequently asked

How much oil does the 1995 Mustang take?

4.0 qt of SYNTHETIC 5W-20 API, per the factory manual.

Does the 1995 Mustang have open recalls?

NHTSA lists 16 recall campaign(s) for this model year. Check your specific vehicle by VIN.