Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 Ford GT.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
Capacities, torques and tune-up values from the factory service manual.
Torque the oil drain plug to 120 degrees ft-lbs. The firing order is 1-4-2-5-3-6.
| Crankshaft Position (CKP) Sensor Bolt(s) | 4.4 ft-lbs |
| Camshaft Position (CMP) Sensor Bolt(s) | 7.4 ft-lbs |
| Camshaft Sprocket and/or Gear Bolt(s) | Stage 1: 30 lb.ft |
| Engine Coolant Temperature (ECT) Sensor Bolt(s) | 7.4 ft-lbs |
| Oxygen (O2S) Sensor Bolt(s) | 35.0 ft-lbs |
| Knock Sense (KS) Bolt(s) | 14.75 ft-lbs |
| Engine Flywheel Bolts | 59.0 ft-lbs |
| Engine Oil Pan Drain Plug | 120 degrees ft-lbs |
| Rear Wheel Hub | 203.0 ft-lbs |
| Cylinder Firing Order | 1-4-2-5-3-6 |
| 1 | 71.0 inch lbs. | 71 in |
| 2 | 45.0 | |
| 1 | 17.0 ft. lbs. | 17 ft. lbs |
| 2 | 32.0 ft. lbs. | 32 ft. lbs |
| 3 | 90.0 | |
| 1 | 89.0 ft. lbs. | 89 ft. lbs |
| 2 | 360 degrees | 360 degrees |
| 3 | 37.0 ft. lbs. | 37 ft. lbs |
| 4 | + 90 | |
Prep Cap bolts
| 1 | 20.0 ft. lbs. | 20 ft. lbs |
| 2 | 180.0 degrees; Side bolts | 180 degrees |
| 1 | 33.0 ft. lbs. | 33 ft. lbs |
| 2 | 90.0 | |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.