FordFlex2014Overview/ford/flex/2014/base/

2014 Ford Flex

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 Flex.

Body SUVTransmission Automatic (S6)

The 2014 Ford Flex is an SUV backed by a six-speed automatic transmission and an engine that requires 6.0 quarts of 5W-20 API oil, delivering EPA estimates of 16 city, 23 highway, and 18 combined mpg. Owner-reported complaints for the model year total 248, with steering ranking as the top issue and four recalls recorded. Across the 2009–2019 generation, the 2014 Flex falls well below the 2013 peak of 578 complaints but remains above the 2017 low of 40, positioning it in the middle of the model’s reliability trajectory.

Model year201920182017201620152014201320122011

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity6.0 qtOEM · verified
Engine oil type5W-20 APIOEM · verified
Lug nut torque100 ft-lbsOEM · verified
EPA fuel economy16/23/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 65 - EX. ECOBOOST · 650 - EX. ECOBOOST CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 65 - EX. ECOBOOST · 650 - EX. ECOBOOST CCAOEM · verified
Tire sizeP235-60R17OEM · verified
Wheel / rimN/A inOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S6)

Dimensions & weight NHTSA vPIC

Overall length202 in
Overall width76 in
Overall height67.7 in
Wheelbase118.1 in
Curb weight4839 lb
Track (front / rear)65.7 / 65.7 in
Weight distribution (front / rear)54/46

Ratings & economy EPA / vPIC

EPA city / highway / combined16 / 23 / 18 mpg
DrivetrainAll-Wheel Drive
Recommended fuelRegular Gasoline

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the Flex of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

5.7–9.0 sec0–60 mph (tested)quickest 5.70 sec — 2013 Limited 3.5L EcoBoost
YearTrim / engine0–60¼ mileHPDrivetrain
2013Limited 3.5L EcoBoost 3.5L Twin-Turbo V65.70 sec14.20 sec365 hpAWD
2016Limited 3.5L EcoBoost 3.5L Twin-Turbo V66.20 sec14.70 sec365 hpAWD
2010SEL 3.5L EcoBoost 3.5L Twin-Turbo V66.00 sec14.60 sec355 hpAWD
2009Limited 3.5L V68.40 sec16.40 sec262 hpAWD
2009SEL 3.5L V68.40 sec16.40 sec262 hpAWD
2009Limited 3.5L V69.00 sec16.80 sec262 hpAWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 6.0 qt of 5W-20 API engine oil, DOT 3 brake fluid. Torque lug nuts to 100 ft-lbs, the oil drain plug to 18.0 ft-lbs. The firing order is 1-4-2-5-3-6. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission FluidFord Mercon LV
Automatic Transmission Fluid Capacity11.0-11.5
Brake FluidDOT 3
Differential Gear Oil Capacity1.5 Pints
Engine Oil5W-20 · API
Engine Oil Capacity6.0 qt
Transfer Case FluidSYNTHETIC · GL-5
Transfer Case Fluid Capacity1 Pint

Engine torques

Intake Manifold to Engine BoltsLower: 7.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts29.5 ft-lbs
Engine Oil Pan Drain Plug18.0 ft-lbs
Engine Oil Pan Drain Plug18.0 ft-lbs

Chassis torques

Lug Nuts100 ft-lbs
Transfer Case Fill Plug15.0 ft-lbs
Transfer Case Drain Plug15.0
Front Wheel Hub258 ft-lbs
Rear Wheel Hub258 ft-lbs

Ignition

Cylinder Firing Order1-4-2-5-3-6

Battery & A/C

RefrigerantR134a
Refrigerant Capacity2.30-2.45 lbs
Oil GroupPAG
Oil Type46
Oil Capacity7.45-8.45 oz
Standard BCI Group Number65 - EX. ECOBOOST
Standard BCI Cranking Performance650 - EX. ECOBOOST cca
Optional BCI Group Number65 - w/ECOBOOST

Service checks

Pressure Test18-20 psi
Thermostat Opening Temperature180-207 °F
Pressure Test14 psi
Radiator Cap Pressure Relief14 psi
Thermostat Opening Temperature175-182 °F
Key ON Engine OFF (KOEO)55.0
Injector Primary Resistance11-18 na SFI ohms
Engine Oil Pressure30 psi

Brakes

Brake ApplicationWITH 13 inch / WITH 14 inch
Torque Caliper to Bracket55 ft-lbs / 24 ft-lbs
Torque to Knuckle122 ft-lbs / 76 ft-lbs
Minimum Pad ThicknessFront: 0.118; Rear: 0.118 in
Brake ApplicationWITH 13 inch / WITH 14 inch
Rotor Runout Limit0.002 in
Rotor Discard at or Under1.122 in / 0.394 in / 1.181 in / 0.689 in

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
189 ft. lbs., step 2: 360 degrees, step 3: 37 ft. lbs., step 4: 9089 ft. lbs
Cylinder Head — tightening sequence 5 stages

Prep Do not reuse old bolts. Coat new bolts with the specified engine oil. · Bolts 1-8

115.0 ft. lbs.15 ft. lbs
226.0 ft. lbs.26 ft. lbs
390 degrees90 degrees
490 degrees90 degrees
545 degrees; Bolt 945 degrees
17.4 ft. lbs.7.4 ft. lbs
Cylinder Head — tightening sequence 7 stages

Prep Do not reuse old bolts. Coat new bolts with the specified engine oil. · Bolts 1-18

115.0 ft. lbs.15 ft. lbs
236.0 ft. lbs.36 ft. lbs
336.0 ft. lbs.36 ft. lbs
436.0 ft. lbs.36 ft. lbs
590 degrees90 degrees
690 degrees90 degrees
790 degrees; Bolts 19-2290 degrees
122 ft. lbs.22 ft. lbs
Cylinder Head — tightening sequence 5 stages

Prep Do not reuse old bolts. Coat new bolts with the specified engine oil. · Bolts 1-8

115.0 ft. lbs.15 ft. lbs
226.0 ft. lbs.26 ft. lbs
390 degrees90 degrees
490 degrees90 degrees
545 degrees; Bolt 945 degrees
17.4 ft. lbs.7.4 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 100,000 mi; coolant every 50,000 mi. The big-interval services (every 50,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 10,000 miAir Conditioning Condenser (inspect) · Air Conditioning Refrigerant Line (inspect) · Battery (inspect) · Brake Line (inspect) · Brake System (inspect) · CV Joint Boot (inspect)
Every 20,000 miAccessory Drive Belt (inspect) · Cabin Air Filter (replace)
Every 30,000 miEngine Air Filter Element (replace) · Temperature Controlled Seat Air Filter (replace)
Every 50,000 miEngine Coolant System (drain, flush & refill)
At 100,000 miAccessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill)
Every 100,000 miSpark Plugs (replace)
At 150,000 miDrive Belt (replace) · Transmission Assembly (drain & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The Ford Flex generation experienced a significant peak in instability in 2013, which saw a high of 578 complaints and 6 recalls. The 2014 model year represents the beginning of a downward trend from that spike, with complaints dropping to 248 and recalls to 4. However, 2014 remains less stable than subsequent years, such as 2015, which had only 100 complaints. For the 2014 model, the most frequent issues involved steering (50) and the fuel/propulsion system (33), though the data does not specify the root causes. This year also recorded 11 crash complaints and 2 fire complaints. Given its position as a midpoint between the 2013 peak and the lower-volume complaint years of 2015-2018, this is not the ideal year to buy.

4
Open recalls
NHTSA campaigns
55
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
248
Owner complaints
11 involved a crash · 2 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Rollover★★★★
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 248 complaints on record, top 8 components.

Steering50
Fuel/Propulsion System33
Electrical System24
Suspension18
Unknown Or Other15
Engine9
Steering,Electrical System5
Seat Belts5

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 4 campaigns on record for this vehicle.

16V621000Fuel System, Gasoline:Delivery:Fuel PumpReported 25/08/2016

Ford Motor Company (Ford) is recalling certain model year 2013-2015 Ford Taurus, Ford Flex, Lincoln MKS and Lincoln MKT vehicles equipped with 3.5L GTDI Ecoboost engines and 2013-2015 Ford Taurus Police Interceptor… Remedy: Ford will notify owners, and dealers will inspect the fuel PEM part number and replace the fuel PEM, as necessary, free of charge. The recall began on December 1, 2016. Owners may…

14V710000SeatsReported 07/11/2014

Ford Motor Company (Ford) is recalling certain model year 2014 Ford F-150 and Flex vehicles manufactured March 1, 2014, to May 31, 2014. The affected vehicles were manufactured with a reduced clearance between the seat… Remedy: Ford will notify owners, and dealers will widen the gap between the seat frame and seat track assembly and recalibrate the seat OCS, free of charge. The recall began November 25…

Technical service bulletins NHTSA · verified

Showing 5 of 55 bulletins on record with NHTSA.

BulletinDateComponentSummary
SSM 546012026-02-23Electrical SystemFord and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory…
SSM 530402024-10-10Unknown Or OtherWhile performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a…
SSM 524762024-04-24EquipmentAll accessory stick-on keyless entry keypads come with a wallet card containing the…
SSM 515362023-04-04StructureFor 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis…
SSM 492102020-09-25Engine And Engine CoolingSome 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Flex. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2014 Flex take?

6.0 qt of 5W-20 API MEETING FORD SPECIFICATION WSS-M2C945-A, per the factory manual.

Does the 2014 Flex have open recalls?

NHTSA lists 4 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the Flex get?

EPA figures are 16 city / 23 highway / 18 combined mpg.