Fluid capacities, tune-up values and fuel economy at a glance.
Engine oil capacity6 qtOEM · verified
Engine oil type5W-30 APIOEM · verified
Lug nut torque140 ft-lbsOEM · verified
Fitment & sizes
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 615 CCA battery, OE oil filter 12690386. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Battery groupBCI 48 · 615 CCAOEM · verified
Tire sizeP265-70R17OEM · verified
Wheel / rim7.5 inOEM · verified
OE service part numbers OEM · verified
Engine oil filter
12690386
Engine air filter
22845992 alt 15908916
Spark plug
12621258
Front wiper blades
25877402 alt 15214346
Serpentine belt
19210691 alt 12626222
Thermostat
89018168 alt 12587397
Cabin air filter
23101674 alt 22759203
Full specifications
Engine, drivetrain, dimensions and economy.
Dimensions & weight NHTSA vPIC
Overall length
222.4 in
Overall width
79.1 in
Overall height
76.8 in
Wheelbase
129.9 in
Curb weight
5836 lb
Track (front / rear)
68.9 / 67.3 in
Weight distribution (front / rear)
51/49
Service quick specs OEM factory data
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6 qt of 5W-30 API engine oil, SAE 75W · SYNTHETIC in the differential, DOT 3 brake fluid. Torque lug nuts to 140 ft-lbs, the oil drain plug to 18.0 ft-lbs. The firing order is 1-8-7-2-6-5-4-3. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
Lubricants & capacities
Automatic Transmission Fluid
ATF
Automatic Transmission Fluid Capacity
6
Brake Fluid
DOT 3
Differential Gear Oil
SAE 75W · SYNTHETIC
Differential Gear Oil Capacity
6.5 qt
Engine Coolant
DEX-COOL OR EQUIVALENT
Engine Oil
5W-30 · API
Engine Oil Capacity
6 qt
Engine torques
Engine Oil Pan Drain Plug
18.0 ft-lbs
Engine Valve Cover Bolts
9.0 ft-lbs
Chassis torques
Leaf Spring to Axle (U-bolts)
74.0 ft-lbs
Leaf Spring to Chassis Bracket
125.0 plus 90 degrees ft-lbs
Leaf Spring to Rear Shackle
70.0 ft-lbs
Leaf Spring Rear Shackle to Chassis Bracket
70.0 ft-lbs
Lug Nuts
140 ft-lbs
Front Wheel Hub
177 ft-lbs
Ignition
Cylinder Firing Order
1-8-7-2-6-5-4-3
Cylinder Firing Order
1-8-7-2-6-5-4-3
Battery & A/C
Refrigerant
R134a
Oil Group
PAG
Standard BCI Group Number
48
Standard BCI Cranking Performance
615 cca
Optional BCI Group Number
48
Optional BCI Cranking Performance
730 cca
Standard BCI Group Number
48
Standard BCI Cranking Performance
615 cca
Service checks
Pressure Test
20 psi
Radiator Cap Pressure Relief
20 psi
Thermostat Opening Temperature
188-206 °F
Pressure Test
15 psi
Radiator Cap Pressure Relief
15 psi
Thermostat Opening Temperature
188-206 °F
Key ON Engine OFF (KOEO)
50-60
Key ON Engine OFF (KOEO)
50-60
Brakes
Brake Application
WITH RPO J92, JD9 / WITH RPO JH6
Torque Caliper to Bracket
74 ft-lbs / 28 ft-lbs / 80 ft-lbs
Torque to Knuckle
148 ft-lbs / 122 ft-lbs / 221 ft-lbs
Brake Application
WITH RPO J92, JD9 / WITH RPO JH6
Torque Caliper to Bracket
80 ft-lbs
Torque to Knuckle
221 ft-lbs / 148 ft-lbs
Minimum Pad Thickness
Front: 0.030; Rear: 0.030 specification
Brake Application
WITH RPO J92, JD9 / WITH RPO JH6
Multi-step torque procedures OEM · verified
Cylinder Head — tightening sequence 3 stages
Prep Do not reuse old bolts. Do not allow oil on cylinder head or head bolt bosses · M11 Bolts:
1
22.0 ft. lbs.
22 ft. lbs
2
90 degrees
90 degrees
3
70 degrees; M8 Bolts:
70 degrees
1
22.0 ft. lbs.
22 ft. lbs
Intake Manifold to Engine Bolts — tightening sequence 1 stages
1
3.7 ft. lbs., step 2: 7.4
3.7 ft. lbs
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
1
11 ft. lbs., step 2: 15
11 ft. lbs
Intake Manifold to Engine Bolts — tightening sequence 1 stages
1
3.7 ft. lbs., step 2: 7.4
3.7 ft. lbs
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
1
11 ft. lbs., step 2: 15
11 ft. lbs
Intake Manifold to Engine Bolts — tightening sequence 1 stages
1
3.7 ft. lbs., step 2: 7.4
3.7 ft. lbs
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
1
6.6 ft. lbs., step 2: 15
6.6 ft. lbs
Intake Manifold to Engine Bolts — tightening sequence 1 stages
1
3.7 ft. lbs., step 2: 7.4
3.7 ft. lbs
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
1
6.6 ft. lbs., step 2: 15
6.6 ft. lbs
Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 100,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.