Chevrolet›Orlando›2013›Overview/chevrolet/orlando/2013/base/

2013 Chevrolet Orlando

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 Orlando.

The 2013 Chevrolet Orlando serves as the focal point of this overview, a reference entry designed to orient researchers to a single model year within the vehicle's broader lineage. Drawing together the available details on the car, the page functions as a structured starting point for examining where this particular year sits in the Orlando's history, framing its specifications, features, and market context for further study. Researchers consulting this resource will find a consolidated foundation from which to explore the 2013 model year in greater technical or historical depth, with the overview acting as a gateway to more granular sources on the vehicle.

Model year2014 2013 2012 2011

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 48 · 615 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 48 · 615 CCAOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	183.1 in
Overall width	72.4 in
Overall height	64.2 in
Wheelbase	108.7 in
Curb weight	3519 lb
Track (front / rear)	62.2 / 62.6 in
Weight distribution (front / rear)	49/51

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine DOT 3 brake fluid. Torque the oil drain plug to 18.0 ft-lbs.

Lubricants & capacities

Brake Fluid

DOT 3

Engine torques

Intake Manifold to Engine Bolts	11 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	10 ft-lbs
Engine Oil Pan Drain Plug	18.0 ft-lbs

Ignition

Spark Plug Manufacturer	AC Delco
Spark Plug Gap	0.039-0.0.043 in
Spark Plug Torque	15.0 ft-lbs

Battery & A/C

Standard BCI Group Number	48
Standard BCI Cranking Performance	615 cca

Service checks

Pressure Test	20 psi
Radiator Cap Pressure Relief	20 psi
Thermostat Opening Temperature	188-206 °F
Key ON Engine OFF (KOEO)	50-100
RPM	43-58 @ Idle rpm
Injector Primary Resistance	1.9-2.3 @ 68 degreesF ohms
Engine Compression	100

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

74 ft. lbs., step 2: 125

74 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 97,500 mi.

Every 7,500 mi	Accelerator Pedal (inspect) · Body Latches, Locks & Hinges (lubricate) · Brake Shift Interlock Solenoid (inspect) · Brake System (inspect) · Engine Assembly (leak inspection) · Engine Coolant System (inspect fluid level)
Every 30,000 mi	Brake Hydraulic System (drain, refill & bleed) · Clutch Hydraulic System (drain & refill)
Every 45,000 mi	Engine Air Filter Element (replace) · Fuel Evaporative Emission Control System (inspect)
Every 97,500 mi	Spark Plug Wires (inspect) · Spark Plugs (replace) · Transmission Fluid & Filter (replace)
At 150,000 mi	Accessory Drive Belt (inspect)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Open recalls

NHTSA campaigns

375

Service bulletins

Manufacturer communications

ODI investigations

Office of Defects Investigation

Owner complaints

0 involved a crash · 0 a fire

No owner complaints on record with NHTSA for this vehicle.

Recalls NHTSA · verified

No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.

Technical service bulletins NHTSA · verified

Showing 5 of 375 bulletins on record with NHTSA.

Bulletin	Date	Component	Summary
PIT5399A	2018-05-23	Equipment	This Preliminary Information communication provides information to the technician about…
100729001C	2018-04-24	Power Train	This informational bulletin provides information for the 6-Speed manual transaxle (RPOs…
PI0281G	2018-04-06	Structure	This preliminary informational bulletin provides information to dealership personnel…
130089010B	2018-04-03	Equipment	This informational bulletin provides information to dealership personnel on policies…
010601011J	2017-11-30	Engine And Engine Cooling	This informational bulletin provides guidelines and diagnostic/repair information to…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific Orlando. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Group 48 battery

Reference guides

Cross-vehicle references for the kinds of data on this page.

Vehicle recalls & TSBs OBD-II trouble codes Torque specifications Maintenance schedules

Frequently asked

Does the 2013 Orlando have open recalls?

NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.