ChevroletEpica2006Overview/chevrolet/epica/2006/base/

2006 Chevrolet Epica

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2006 Epica.

Transmission Automatic 4-spd

The 2006 Chevrolet Epica is EPA-rated at 17/25/20 mpg city/highway/combined.

Model year20092006

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

EPA fuel economy17/25/20 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 34 · 600 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 34 · 600 CCAOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic 4-spd

Dimensions & weight NHTSA vPIC

Overall length187.8 in
Overall width71.7 in
Overall height56.7 in
Wheelbase105.9 in
Curb weight3380 lb
Track (front / rear)60.6 / 60.6 in
Weight distribution (front / rear)59/41

Ratings & economy EPA / vPIC

EPA city / highway / combined17 / 25 / 20 mpg
DrivetrainFront-Wheel Drive
Passenger volume101 cu ft
Cargo volume13 cu ft
Recommended fuelRegular Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine DOT 3 brake fluid. Torque the oil drain plug to 18.0 ft-lbs.

Lubricants & capacities

Brake FluidDOT 3

Engine torques

Engine Oil Pan Drain Plug18.0 ft-lbs

Battery & A/C

Standard BCI Group Number34
Standard BCI Cranking Performance600 cca

Service checks

Engine Compression100

Brakes

Torque Caliper to Bracket33 ft-lbs / 20 ft-lbs
Torque to Knuckle70 ft-lbs
Rotor Max Parallel Variation0.001 in
Rotor Runout Limit0.002 in
Rotor Nominal Thickness From0.95 in / 0.472 in
Rotor Nominal Thickness To0.95 in / 0.472 in
Rotor Discard at or Under0.866 in / 0.394 in

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 7,500 mi; spark plugs every 100,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 7,500 miEngine Oil (drain & refill) · Engine Oil Filter (replace) · Tire & Wheel Assembly (rotate)
Every 15,000 miAccessory Drive Belt (inspect) · Cabin Air Filter (replace)
Every 30,000 miBrake Hydraulic System (drain, refill & bleed) · Engine Air Filter Element (replace) · Engine Coolant System (drain, flush & refill) · Fuel Evaporative Emission Control System (inspect) · Fuel Filter (replace) · PCV System (inspect)
Every 42,000 miEngine Oil Pan Drain Plug Gasket (replace)
Every 100,000 miSpark Plugs (replace)

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Epica. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

What gas mileage does the Epica get?

EPA figures are 17 city / 25 highway / 20 combined mpg.