Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2006 Terraza 4WD.
The 2006 Buick Terraza 4WD takes 4.5 qt of 5W-30 engine oil.
Quick specs
Fluid capacities, tune-up values and fuel economy at a glance.
Engine oil capacity4.5 qtOEM · verified
Engine oil type5W-30 APIOEM · verified
Lug nut torque100 ft-lbsOEM · verified
Fitment & sizes
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 34 · 600 CCA battery, OE oil filter 12731175. Note the factory cabin air filter is now discontinued — plan on a superseded or quality aftermarket equivalent, which the part pages below list where known. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
Battery groupBCI 34 · 600 CCAOEM · verified
Tire sizeP225-60R17OEM · verified
Wheel / rim6.5 inOEM · verified
OE service part numbers OEM · verified
Engine oil filter
12731175 alt 12731179
Engine air filter
10354942
Spark plug
12681662 alt 12681664
Battery
88866304
Front wiper blades
15192144 alt 15192143
Serpentine belt
12578274 alt 12571918
Thermostat
24507563 alt 12591881
Cabin air filter
10322538 discontinued
Full specifications
Engine, drivetrain, dimensions and economy.
Dimensions & weight NHTSA vPIC
Overall length
205.1 in
Overall width
72 in
Overall height
72 in
Wheelbase
121.3 in
Curb weight
4427 lb
Track (front / rear)
63 / 63 in
Weight distribution (front / rear)
56/44
Service quick specs OEM factory data
Capacities, torques and tune-up values from the factory service manual.
This engine holds 4.5 qt of 5W-30 API engine oil, VERSATRAK PART NUMBER: 1238514 OR EQUIVALENT in the differential, DOT 3 brake fluid. Torque lug nuts to 100 ft-lbs, the oil drain plug to 19.0 ft-lbs. The firing order is 1-2-3-4-5-6. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
Prep Do not reuse old bolts. Coat new bolts with fresh engine oil
1
44.0 ft. lbs.
44 ft. lbs
2
140 degrees
140 degrees
Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 100,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
Every 25,000 mi
Exhaust System (Complete) (inspect) · Fuel System (inspect)