BuickEnvision2017Overview/buick/envision/2017/base/

2017 Buick Envision

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 Envision.

Body SUV

The 2017 Buick Envision is an SUV that requires 6.0 quarts of oil and is specified with either 5W‑30 or 0W‑30 viscosity. In its first model year it generated 80 owner complaints — the highest count in a complaint history spanning 2016‑2026 — with the predominant issue in the service‑brake area and four recall actions recorded. The complaint trajectory then drops sharply, reaching only seven complaints by 2025, showing that the 2017 model year records the highest complaint volume in the Envision’s reliability timeline.

Model year202620252024202320222021202020192017

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity6.0 qtOEM · verified
Engine oil type5W-30 / 0W-30OEM · verified
Lug nut torque103 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 94R · 730 CCA battery, OE oil filter 25206377. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 94R · 730 CCAOEM · verified
Tire sizeP225/60R18OEM · verified
Wheel / rimNS inOEM · verified

OE service part numbers OEM · verified

Engine oil filter25206377
Engine air filter22971580
Spark plug12680074 alt 12681659
Battery88864542
Front wiper blades84574892 alt 84574893
Serpentine belt12664598
Thermostat12630780 alt 25201447
Cabin air filter13508023

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length183.9 in
Overall width72.4 in
Overall height66.9 in
Wheelbase107.9 in
Curb weight4054 lb
Track (front / rear)62.2 / 62.2 in
Weight distribution (front / rear)59/41

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the Envision of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

7.0–7.1 sec0–60 mph (tested)quickest 7.00 sec — 2017 Premium I
YearTrim / engine0–60¼ mileHPDrivetrain
2017Premium I 2.0L Turbo I-47.00 sec15.40 sec252 hpAWD
2017Premium II 2.0L Turbo I-47.00 sec15.30 sec252 hpAWD
2017Premium II 2.0L Turbo I-47.10 sec15.30 sec252 hpAWD
2019Premium II 2.0L Turbo I-46.60 sec15.10 sec252 hpAWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 6.0 qt of 5W-30 / 0W-30 engine oil, Synthetic · GL-5 · 75W-90 in the differential, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake FluidDOT 4
Differential Gear OilSynthetic · GL-5 · 75W-90
Differential Gear Oil Capacity1.4 qt
Engine CoolantDex-Cool
Engine Coolant Capacity8.1
Engine CoolantDex-Cool
Engine Coolant Capacity7.0
Engine Oil5W-30 · 0W-30

Engine torques

Crankshaft Position (CKP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)7.4 ft-lbs
Crankshaft Position (CKP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Bearing/Carrier Cap Bolts or Studs89.0 inch lbs. ft-lbs
Camshaft Bearing/Carrier Cap Bolts or Studs89.0 inch lbs. ft-lbs
Engine Coolant Temperature (ECT) Sensor Bolt(s)15.0 ft-lbs
Oxygen (O2S) Sensor Bolt(s)35.0 ft-lbs

Chassis torques

Driveshaft Flange to Transmission53.0 ft-lbs
Lug Nuts103 ft-lbs
Automatic Transmission Drain Plug9.0-10.0 ft-lbs

Ignition

Cylinder Firing Order1-3-4-2
Spark Plug ManufacturerAC Delco
Spark Plug Gap0.037-0.043 in
Spark Plug Torque15.0 ft-lbs
Spark Plug ManufacturerAC Delco
Spark Plug Gap0.037-0.043 in
Spark Plug Torque15.0 ft-lbs

Battery & A/C

RefrigerantR134a
Refrigerant Capacity1.30 lbs
Oil GroupPAG
Oil Type46
Oil Capacity5.00 oz
Standard BCI Group Number94R
Standard BCI Cranking Performance730 cca

Service checks

Fuel Pump Pressure Minimum43 psi
Fuel Pump Pressure Maximum58 psi
Key ON Engine OFF (KOEO)50-94
RPM43-58 rpm

Brakes

Brake Caliper Bolt to Carrier TorqueFront: 35; Rear: 18
Brake Caliper Carrier to Hub Bolt TorqueFront: 111; Rear: 74 Use
ABS Sensor Torque6.6
Minimum Pad Thickness0.078
Vented Rotor Minimum Thickness for ReplacementRear: 0.393
Vented Rotor Minimum Thickness after RefinishRear: 0.402
Variation from Parallelism Thickness Variation0.001
Maximum Rotor Runout0.002

Multi-step torque procedures OEM · verified

Front Wheel Hub — tightening sequence 1 stages
1111.0 ft. lbs., Step 2: Back off 45.0 degrees, Step 3: 185.0111 ft. lbs
Rear Wheel Hub — tightening sequence 1 stages
1111.0 ft. lbs., Step 2: Back off 45.0 degrees, Step 3: 185.0111 ft. lbs
Camshaft Sprocket and/or Gear Bolt(s) — tightening sequence 1 stages
122.0 ft. lbs., Step 2: 10022 ft. lbs
Camshaft Sprocket and/or Gear Bolt(s) — tightening sequence 1 stages
122.0 ft. lbs., Step 2: 10022 ft. lbs
Connecting Rod (Large End) Bearings — tightening sequence 1 stages
118.0 ft. lbs., Step 2: 11018 ft. lbs
Connecting Rod (Large End) Bearings — tightening sequence 2 stages
118.0 ft. lbs.18 ft. lbs
2110.0
Crankshaft Pulley and/or Damper Bolts — tightening sequence 2 stages
1111.0 ft. lbs.111 ft. lbs
2+ 140
Crankshaft Pulley and/or Damper Bolts — tightening sequence 3 stages
1111.0 ft. lbs.111 ft. lbs
2Use New Bolt
3+ 140
Cylinder Head — tightening sequence 2 stages

Prep Do not re-use old bolts. Do not allow oil to contaminate cylinder head surface or head bolt bosses.

122.0 ft. lbs.22 ft. lbs
2180 degrees180 degrees
Cylinder Head — tightening sequence 2 stages

Prep Do not re-use old bolts. Do not allow oil to contaminate cylinder head surface or head bolt bosses.

122.0 ft. lbs.22 ft. lbs
2190 degrees190 degrees
Engine Flywheel Bolts — tightening sequence 2 stages

Prep AT

115.0 ft. lbs., Step 2; 22.0 ft. lbs., Step 3: 40 degrees; MT15 ft. lbs
122.0 ft. lbs.22 ft. lbs
280
Engine Flywheel Bolts — tightening sequence 3 stages

Prep AT

115.0 ft. lbs.15 ft. lbs
222.0 ft. lbs.22 ft. lbs
340.0 degrees; MT40 degrees
122.0 ft. lbs.22 ft. lbs
280.0 degrees80 degrees
Intake Manifold to Engine Bolts — tightening sequence 1 stages
18.8
Main Bearings — tightening sequence 2 stages

Prep Lower crankcase crankshaft bolts

115.0 ft. lbs.15 ft. lbs
2140 degrees; Lower crankcase perimeter bolts140 degrees
118.0 ft. lbs.18 ft. lbs
Oil Pan to Block Bolts — tightening sequence 1 stages
115.0 ft. lbs., Step 2: 14015 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 7,500 mi; spark plugs every 60,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 7,500 miAccelerator Pedal (inspect) · Body Latches, Locks & Hinges (lubricate) · Brake Shift Interlock Solenoid (inspect) · Brake System (inspect) · Engine Oil (inspect fluid level) · Engine Oil Life Monitor (inspect)
Every 22,500 miCabin Air Filter (replace)
Every 45,000 miEngine Air Filter Element (replace) · Fuel Evaporative Emission Control System (inspect)
Every 60,000 miSpark Plug Wires (inspect) · Spark Plugs (replace)
At 150,000 miAccessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

In 2017, the Buick Envision saw 80 complaints and 4 recalls, a sharp increase from the 19 complaints and 5 recalls of 2016 and a marked spike relative to the subsequent years, where complaints fell to single digits by 2018 and remained low thereafter. The recall count dipped to zero in 2018 but rose slightly again in 20212023, indicating a brief resurgence of safety issues. The 2017 model’s complaint profile—dominated by Service Brakes (11) and Electrical System (10)—suggests specific component reliability concerns that are not reflected in later years. Crash and fire complaints for 2017 were minimal, with only two each, showing that severe safety incidents were rare. Overall, 2017 sits at the peak of the complaint/recall arc for this generation, implying that newer models have improved reliability. Therefore, a 2017 Buick Envision may be a less attractive purchase compared to later years, where complaints and recalls have substantially declined.

4
Open recalls
NHTSA campaigns
1045
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
80
Owner complaints
2 involved a crash · 2 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Overall★★★★★
Frontal★★★★
Side★★★★★
Rollover★★★★
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 80 complaints on record, top 8 components.

Service Brakes11
Electrical System10
Unknown Or Other7
Exterior Lighting5
Power Train4
Service Brakes, Hydraulic3
Seat Belts3
Electrical System,Engine2

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 4 campaigns on record for this vehicle.

17V404000EquipmentReported 27/06/2017

General Motors LLC (GM) is recalling certain 2016-2017 Buick Envision vehicles. An accessory NSV Universal Tablet Holder may have been installed incorrectly onto the front seat head restraints, preventing the head… Remedy: GM will notify owners, and dealers will inspect the head restraints and tablet holders for the correct installation, reinstalling them as necessary, free of charge. The recall…

18V358000Fuel System, Gasoline:Delivery:Fuel PumpReported 31/05/2018

General Motors LLC (GM) is recalling certain 2015-2018 GMC Canyon, 2016-2017 Buick Envision, 2016-2018 Chevrolet Colorado and Malibu, 2017-2018 GMC Acadia, 2018 Buick LaCrosse, Cadillac ATS, Chevrolet Equinox, and GMC… Remedy: GM will notify owners, and dealers will replace the high pressure fuel pump, and high pressure fuel pipe, free of charge. The recall began July 2, 2018. Owners may contact Buick…

Technical service bulletins NHTSA · verified

Showing 5 of 1045 bulletins on record with NHTSA.

BulletinDateComponentSummary
PIT3271Q2026-04-01Unknown Or OtherThis preliminary information communicates information about how to determine if a wheel…
PIP61042026-03-09Unknown Or OtherThis Preliminary information communicates the steps on how to save a GDS2 Session Log and…
PIP4902V2026-03-09Unknown Or OtherThis preliminary information advises a dealer on how to email GDS2 session logs into…
PIP4902U2026-01-08Unknown Or OtherThis preliminary information advises a dealer on how to email GDS2 session logs into…
PIT5214G2025-11-20Unknown Or OtherThis Preliminary Information communication provides information to the technician about…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Envision. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2017 Envision take?

6.0 qt of 5W-30 meeting GM Dexos 1 specification or equivalent. Where temperatures fall below -20 degreesF, GM recommends using 0W-30 oil meeting GM Dexos 1 specification., per the factory manual.

Does the 2017 Envision have open recalls?

NHTSA lists 4 recall campaign(s) for this model year. Check your specific vehicle by VIN.