Buick›Allure›2006›Overview/buick/allure/2006/base/

2006 Buick Allure

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2006 Allure.

The 2006 Buick Allure is defined by specific maintenance parameters, requiring 5.5 qt of 5W-30 API oil for its engine. This model year occupies a distinct position in the vehicle's history, distinguished by zero recalls and a total of only 4 owner complaints. While exterior lighting emerged as the top complaint area, the low aggregate data solidifies this model year's status as a stable period within the model's reliability history.

Model year2009 2008 2007 2006 2005

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity5.5 qtOEM · verified

Engine oil type5W-30 APIOEM · verified

Lug nut torque100 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 34 · 750 CCA battery. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 34 · 750 CCAOEM · verified

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	198.4 in
Overall width	72.8 in
Overall height	57.5 in
Wheelbase	110.2 in
Curb weight	3503 lb
Track (front / rear)	61 / 61.4 in
Weight distribution (front / rear)	63/37

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 5.5 qt of 5W-30 API engine oil. Torque lug nuts to 100 ft-lbs, the oil drain plug to 22.0 ft-lbs. The firing order is 1-6-5-4-3-2.

Lubricants & capacities

Engine Oil	5W-30 · API
Engine Oil Capacity	5.5 qt

Engine torques

Intake Manifold to Engine Bolts	Upper and Lower: 17 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	15 ft-lbs
Intake Manifold to Engine Bolts	Lower: 11; Upper: 7.4 ft-lbs
Exhaust Manifold to Cylinder Head Bolts	22 ft-lbs
Engine Oil Pan Drain Plug	18.0 ft-lbs
Engine Oil Pan Drain Plug	18.0 ft-lbs
Engine Oil Pan Drain Plug	22.0 ft-lbs
Engine Valve Cover Bolts	7.5 ft-lbs

Chassis torques

Lug Nuts

100 ft-lbs

Ignition

Cylinder Firing Order	1-2-3-4-5-6
Cylinder Firing Order	1-6-5-4-3-2
Spark Plug Manufacturer	Ac Delco
Spark Plug Gap	.044 in
Spark Plug Torque	15 ft-lbs
Spark Plug Manufacturer	AC Delco
Spark Plug Gap	0.060 in
Spark Plug Torque	11.0 ft-lbs

Battery & A/C

Standard BCI Group Number	34
Standard BCI Cranking Performance	750 cca
Standard BCI Group Number	34
Standard BCI Cranking Performance	680 cca

Service checks

Fuel Pump Pressure Minimum	60.0 psi
Key ON Engine OFF (KOEO)	55-60
RPM	45-47 @ Idle rpm
Fuel Pump Pressure Minimum	62.0 psi
Key ON Engine OFF (KOEO)	56-62
RPM	46-59 @ Idle rpm
Injector Primary Resistance	11-14 @ 70 degreesF ohms
Injector Primary Resistance	11-14 @ 70 degreesF ohms

Brakes

Torque Caliper to Bracket	70 ft-lbs / 25 ft-lbs
Torque to Knuckle	133 ft-lbs / 89 ft-lbs
Minimum Pad Thickness	Front: 0.030; Rear: 0.030 specification
Rotor Max Parallel Variation	0.001 in
Rotor Runout Limit	0.002 in
Rotor Nominal Thickness From	1.27 in / 0.551 in
Rotor Nominal Thickness To	1.27 in / 0.551 in
Rotor Minimum Machining	1.22 in / 0.51 in

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

74 ft. lbs., step 2: 150

74 ft. lbs

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages

111 ft. lbs., step 2: 76

111 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 100,000 mi; coolant at 150,000 mi. The big-interval services (at 150,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.

Every 25,000 mi	Exhaust System (Complete) (inspect) · Fuel System (inspect)
Every 50,000 mi	Engine Air Filter Element (replace)
Every 100,000 mi	Spark Plug Wires (inspect) · Spark Plugs (replace) · Transmission Fluid & Filter (replace)
At 150,000 mi	Accessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 2006 Buick Allure lead in one area — the exterior lighting, 1 of 4 reports (25%), well ahead of the next concern. NHTSA has issued no recalls for this vehicle, so these are owner-reported concerns only. 0 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the exterior lighting pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

Open recalls

NHTSA campaigns

189

Service bulletins

Manufacturer communications

ODI investigations

Office of Defects Investigation

Owner complaints

0 involved a crash · 0 a fire

Owner complaints filed with NHTSA, by component

All 4 complaints on record, top 4 components.

Exterior Lighting1

Steering1

Structure1

Fuel System, Other1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.

Technical service bulletins NHTSA · verified

Showing 5 of 189 bulletins on record with NHTSA.

Bulletin	Date	Component	Summary
PIP5601C	2025-07-18	Unknown Or Other	This PI communicates the requirement to provide a pico file to receive diagnostic…
PIT5074R	2025-05-30	Unknown Or Other	This Preliminary Information communication provides information to the technician about…
PIT5074R	2025-05-30	Unknown Or Other	This Preliminary Information communication provides information to the technician about…
PIT5074R	2025-05-30	Unknown Or Other	This Preliminary Information communication provides information to the technician about…
PIP5358D	2025-02-19	Unknown Or Other	This Preliminary Information communication provides information to the technician about…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420

Catalyst system efficiency below threshold — Bank 1

P0300

Random / multiple cylinder misfire detected

P0171

System too lean — Bank 1

P0455

Evaporative emission system leak detected — large leak

P0128

Coolant thermostat below regulating temperature

P0442

Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN

Decode a VIN to confirm the transmission and build data for a specific Allure. OEM

Build data

Plant, GVWR class, engine and body data for any 17-character VIN.

Recalls

Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Group 34 battery Vehicles taking 5.5 qt

Reference guides

Cross-vehicle references for the kinds of data on this page.

Vehicle recalls & TSBs OBD-II trouble codes Torque specifications Maintenance schedules Fluid capacities & specs

Frequently asked

How much oil does the 2006 Allure take?

5.5 qt of 5W-30 API, per the factory manual.

Does the 2006 Allure have open recalls?

NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.