Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 X1 sDrive28i SAV.
The 2013 BMW X1 sDrive28i SAV is officially classified as a passenger car riding on the E84 platform and paired with an Automatic (S8) transmission. Delivering an EPA-estimated 24 city and 33 highway MPG, the vehicle requires a substantial 7.3 quarts of engine oil in 0W-30, 0W-40, or 5W-30 viscosity to maintain its mechanicals. Despite its efficiency, this model year sits at a troubled point in the vehicle's reliability history, where 101 owner complaints, five recalls, and air bags as the top complaint area combine to signal substantial ownership risks.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11427525334 |
| Engine air filter | 13717599285 alt 13717582908 |
| Fuel filter | 16117313791 |
| Spark plug | 12120039664 alt 12120037582 |
| Battery | 61217586960 alt 61217586961 |
| Front wiper blades | 61612158219 |
| Thermostat | 11538636594 alt 11537601158 |
| Cabin air filter | 64319142114 alt 64319313519 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 175.2 in |
| Overall width | 70.9 in |
| Overall height | 61 in |
| Wheelbase | 108.7 in |
| Curb weight | 3726 lb |
| Track (front / rear) | 59.1 / 60.2 in |
| Weight distribution (front / rear) | 51/49 |
| EPA city / highway / combined | 24 / 33 / 27 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.3 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 7.3 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Crankshaft Pulley and/or Damper Bolts | 26 ft-lbs |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | Plenum: 11 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Transfer Case Fill Plug | 24.0 ft-lbs |
| Transfer Case Drain Plug | 24.0 ft-lbs |
| Rear Wheel Hub | 221 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Type | 46 |
| Oil Group | PAG |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 570 cca |
| Optional BCI Group Number | 94R |
| Optional BCI Cranking Performance | 800 cca |
| Standard BCI Group Number | 48 |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 17-23 psi |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 101-145 PSI. 29 maximum variation. psi |
| Engine Compression | 145-232 PSI. 29 maximum variation. psi |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | in sequence 1-10 | 6 ft. lbs |
| 1 | 6 ft. lbs., Step 2: 9.6 | 6 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW X1 sDrive28i SAV lead in one area — the air bags, 28 of 101 reports (28%), well ahead of the next concern. NHTSA has issued no recalls for this vehicle, so these are owner-reported concerns only. 4 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 101 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 147 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B012016 | 2026-05-06 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B611026 | 2026-04-23 | Electrical System | While performing a 12-Volt battery jump start, disconnect, or replacement, Vehicle test… |
| B062225 | 2025-03-24 | Structure | Rear Bumper Return |
| B012016 | 2025-03-13 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.3 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 5 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 24 city / 33 highway / 27 combined mpg.