Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2026 M240i.
The 2026 BMW M240i is EPA-rated at 23/32/26 mpg city/highway/combined.
Fluid capacities, tune-up values and fuel economy at a glance.
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 179.1 in |
| Overall width | 72.4 in |
| Overall height | 54.7 in |
| Wheelbase | 107.9 in |
| Curb weight | 3933 lb |
| Track (front / rear) | 62.2 / 62.6 in |
| Weight distribution (front / rear) | 53/47 |
| EPA city / highway / combined | 23 / 32 / 26 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
Independent road tests for the M240i of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2022 | xDrive (Shadowline) 3.0L Turbo I-6 | 3.60 sec | 12.10 sec | 382 hp | AWD |
| 2022 | xDrive (Shadowline) 3.0L Turbo I-6 | 4.00 sec | 12.40 sec | 382 hp | AWD |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.
EPA figures are 23 city / 32 highway / 26 combined mpg.