BMWM240i2024Overview/bmw/m240i/2024/base/

2024 BMW M240i

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2024 M240i.

Transmission Automatic (S8)

The 2024 BMW M240i is EPA-rated at 22/32/26 mpg city/highway/combined.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

EPA fuel economy22/32/26 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 11428583896. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

OE service part numbers OEM · verified

Engine oil filter11428583896 alt 11427826799
Engine air filter13718635102
Spark plug12122455258
Battery61217555719 alt 61216806755
Front wiper blades61619478361
Thermostat11539494425 alt 11539494424
Cabin air filter64119382886 alt 64119382885

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S8)

Dimensions & weight NHTSA vPIC

Overall length178.7 in
Overall width72.4 in
Overall height54.7 in
Wheelbase107.9 in
Curb weight3891 lb
Track (front / rear)62.2 / 62.6 in
Weight distribution (front / rear)53/47

Ratings & economy EPA / vPIC

EPA city / highway / combined22 / 32 / 26 mpg
DrivetrainRear-Wheel Drive
Recommended fuelPremium Gasoline

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the M240i of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

3.6–4.0 sec0–60 mph (tested)quickest 3.60 sec — 2022 xDrive (Shadowline)
YearTrim / engine0–60¼ mileHPDrivetrain
2022xDrive (Shadowline) 3.0L Turbo I-63.60 sec12.10 sec382 hpAWD
2022xDrive (Shadowline) 3.0L Turbo I-64.00 sec12.40 sec382 hpAWD

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 1,200 mi.

At 1,200 miEngine Oil (drain & refill) · Engine Oil Filter (replace)

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific M240i. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

What gas mileage does the M240i get?

EPA figures are 22 city / 32 highway / 26 combined mpg.