Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 100,000 mi.
| Every 100,000 mi | Oxygen Sensor (replace) · Spark Plugs (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2004 760LI.
The 2004 BMW 760LI. It takes 9.0 qt of 15W-40 engine oil and is EPA-rated at 13/21/16 mpg city/highway/combined.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11427542021. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11427542021 |
| Engine air filter | 13717505007 |
| Fuel filter | 16126754017 |
| Spark plug | 12120037607 alt 12129071003 |
| Battery | 61217591085 |
| Front wiper blades | 61610442837 |
| Thermostat | 11538632664 alt 11537586885 |
| Cabin air filter | 64119272643 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 203.5 in |
| Overall width | 74.8 in |
| Overall height | 58.7 in |
| Wheelbase | 122.8 in |
| Curb weight | 4872 lb |
| Track (front / rear) | 61.4 / 61.8 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 13 / 21 / 16 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 105 cu ft |
| Cargo volume | 18 cu ft |
| Recommended fuel | Premium Gasoline |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
Independent road tests for the 760LI of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2003 | Sedan 6.0L V12 | 5.10 sec | 13.60 sec | 438 hp | RWD |
| 2003 | Sedan 6.0L V12 | 5.60 sec | 14.00 sec | 438 hp | RWD |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.0 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-7-5-11-3-9-6-12-2-8-4-10. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 3.2 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 9.0 qt |
| Power Steering Fluid | ATF |
| Intake Manifold to Engine Bolts | M7 bolts: 11 ft-lbs, M8 bolts: 16 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | M7 bolts: 11 ft-lbs, M8 bolts: 16 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Rear Wheel Hub | 310 ft-lbs |
| Cylinder Firing Order | 1-7-5-11-3-9-6-12-2-8-4-10 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.148-3.00 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Engine Compression | 142-171 psi |
| Torque Caliper to Bracket | 81 ft-lbs / 18-22 ft-lbs |
| Torque to Knuckle | 96-111 ft-lbs / 49 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Nominal Thickness From | 1.181 in / 0.945 in |
| Rotor Nominal Thickness To | 1.181 in / 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 1.118 in |
| Rotor Finish | 0.5 - 3.5 μin |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 60 | 73 ft. lbs |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 60 degrees | 60 degrees |
| 3 | 60 | |
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the spark plugs every 100,000 mi.
| Every 100,000 mi | Oxygen Sensor (replace) · Spark Plugs (replace) |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.0 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
EPA figures are 13 city / 21 highway / 16 combined mpg.