Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 750Li Sedan.
The 2013 BMW 750Li Sedan is a passenger car riding on the F02 platform, equipped with an Automatic (S8) transmission and a lubrication system requiring 9.0 quarts of 0W-30, 0W-40, or 5W-30 viscosity oil. EPA ratings list fuel economy at 16 mpg city, 24 mpg highway, and 19 mpg combined. In the model’s reliability history, this year presents a sparse record of just nine total owner complaints and one recall, signaling limited reported issues despite the engine constituting the dominant category of concern.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11427583220. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11427583220 |
| Engine air filter | 13717577458 alt 13717577457 |
| Spark plug | 12120040581 |
| Battery | 61217639053 |
| Front wiper blades | 61612147361 |
| Thermostat | 11538632664 alt 11537586885 |
| Cabin air filter | 64319175484 alt 64119272642 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 205.1 in |
| Overall width | 74.8 in |
| Overall height | 58.3 in |
| Wheelbase | 126.4 in |
| Curb weight | 4799 lb |
| Track (front / rear) | 63.4 / 64.2 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 16 / 24 / 19 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 115 cu ft |
| Cargo volume | 14 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.0 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.2 Pints |
| Differential Gear Oil Capacity | 2.5 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 9.0 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 26-30 psi |
| Engine Compression | 203-232 PSI. 29 maximum variation. psi |
| Brake Application | WITH 12.76 ROTOR / WITH FN3 |
| Torque Caliper to Bracket | 26 ft-lbs |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH 12.76 ROTOR / WITH FN3 |
| Rotor Nominal Thickness From | 0.787 in / 1.181 in / 0.945 in / 1.417 in |
| Rotor Nominal Thickness To | 0.787 in / 1.181 in / 0.945 in / 1.417 in |
| Rotor Minimum Machining | 0.031 in |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 60 | 73 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW 750Li Sedan dominate in one area — the engine, 3 of 9 reports (33%), well ahead of the next concern. None of this vehicle's 1 recall campaigns target the engine, so those reports read as owner-reported wear-and-tear rather than an acknowledged defect. 0 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 9 complaints on record, top 7 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 1 of 1 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2013-2015 740i, 740Li, 740Lxi, 750i, 750xi, 750Li and 750Lxi and 2014 ActiveHybrid 7 vehicles. The affected vehicles may have received incorrect replacement left rear… Remedy: BMW will notify owners, and dealers will inspect the vehicles and replace any incorrect left rear taillight assemblies, free of charge. The recall began August 11, 2017. Owners…
Showing 5 of 348 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B160623 | 2023-12-20 | Engine And Engine Cooling | Engine will crank but not start. There is no communication with the integrated fuel… |
| B653423 | 2023-11-22 | Electrical System | Customers may state that the alarm system (DWA) is not active after locking their… |
| B010122 | 2023-05-01 | Equipment | With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.0 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 16 city / 24 highway / 19 combined mpg.