Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 100,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2000 740I.
The 2000 BMW 740i rides on the E38 platform with a five-speed automatic transmission, carrying a substantial 7.9-quart oil capacity requiring 15W-40, 10W-40, or 10W-30 API SJ viscosity while posting EPA fuel economy of 15 mpg city and 22 mpg highway. Within the model’s 1993–2016 complaint history, this model year sits mid-spectrum with 12 owner-reported issues—well below the 1993 high of 22 yet notably above the 1996 low of 1—accompanied by two recalls. That placement, combined with Power Train ranking as the top complaint area, marks the 2000 740i as a moderately reliability-challenged example of the lineage that warrants diligent mechanical scrutiny.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 95R · 950 CCA battery, OE oil filter 11421741000. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11421741000 alt 11427510717 |
| Engine air filter | 13721736675 |
| Fuel filter | 13321702632 |
| Spark plug | 12129071003 alt 12120037607 |
| Battery | 61216902796 |
| Front wiper blades | 61618203954 alt 61618361475 |
| Thermostat | 11511705408 alt 11531436386 |
| Cabin air filter | 64312339888 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic 5-spd |
| Overall length | 196.1 in |
| Overall width | 73.2 in |
| Overall height | 56.7 in |
| Wheelbase | 115.4 in |
| Curb weight | 4255 lb |
| Track (front / rear) | 61 / 61.4 in |
| Weight distribution (front / rear) | 51/49 |
| EPA city / highway / combined | 15 / 22 / 18 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 100 cu ft |
| Cargo volume | 13 cu ft |
| Recommended fuel | Premium Gasoline |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
Independent road tests for the 740I of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2000 | 740 740i Sedan 4.4L V8 | 5.90 sec | 15.50 sec | 282 hp | RWD |
| 2000 | 740 740iL Protection Sedan 4.4L V8 | 7.70 sec | 16.00 sec | 282 hp | RWD |
| 2001 | 740 740iL Sedan 4.4L V8 | 6.60 sec | 15.00 sec | 282 hp | RWD |
| 1998 | 740 740iL 4.4L V8 | 6.80 sec | 15.20 sec | 282 hp | RWD |
| 1996 | 740 740iL Sedan 4.4L V8 | 6.90 sec | 15.20 sec | 282 hp | RWD |
| 1995 | 740 740iL Sedan 4.0L V8 | 7.90 sec | 16.00 sec | 282 hp | RWD |
| 1995 | 740 740i Sedan 4.0L V8 | 8.00 sec | 16.10 sec | 282 hp | RWD |
| 1995 | 740 740i Sedan 4.0L V8 | 8.40 sec | 16.60 sec | 282 hp | RWD |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.9 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to 22.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 3 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.9 qt |
| Power Steering Fluid | ATF |
| Engine Oil Pan Drain Plug | 22.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Rear Wheel Hub | 221 ft-lbs |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Ignition Coil Primary Resistance | 0.4-0.8 ohms |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.148-3.00 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Standard BCI Group Number | 95R |
| Standard BCI Cranking Performance | 950 cca |
| Injector Primary Resistance | 15-17 ohms |
| Engine Compression | 174-203 psi |
| Engine Oil Pressure | 7.25 at idle, 65.25 regulated. psi |
| Intake Valve Lash | Hydraulic in |
| Exhaust Valve Lash | Hydraulic in |
| Torque Caliper to Bracket | 18-22 ft-lbs / 81 ft-lbs |
| Torque to Knuckle | 49 ft-lbs / 81-96 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 1.118 in / 0.409 in |
| Rotor Finish | 0.5 - 3.5 μin |
| 1 | 73 ft. lbs., step 2: 60 degrees, step 3: 60 degrees, step 4: 30 | 73 ft. lbs |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 80 degrees | 80 degrees |
| 3 | 80 | |
Normal service, condensed from the factory interval matrix.
| Every 100,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The 2000 BMW 740I sits at a critical inflection point in this generation's federal record, where complaint volumes — which had stabilized at 8 per year in both 1998 and 1999 — jumped to 12, foreshadowing a further rise to 15 in 2001. Recalls followed the same trajectory, doubling from 1 in 1999 to 2 in 2000 before spiking to 4 in 2001, making the final two model years the most recall-heavy of the entire 1993–2001 run. The target year's top complaint areas center on the power train (3 complaints) and fuel system (2 complaints), with one crash and one fire complaint recorded, though the data does not specify root causes for any of these. Mid-generation years (1996–1997) represent the low-water mark for complaints (1–3) and the peak for technical service bulletins (9–15), suggesting BMW was actively addressing issues through dealer-level fixes rather than NHTSA escalations during that period. By contrast, the 2000 model year's rising complaint and recall counts indicate that the manufacturer's earlier TSB-driven mitigation strategy was losing effectiveness as the platform aged. **Takeaway:** the 2000 740I is a marginal purchase — it is meaningfully worse than the 1996–1999 years on both complaints and recalls, and it precedes an even worse 2001 finale; a buyer should prioritize a 1996–1998 example over this model year if seeking the most favorable federal record in the generation.
All 12 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 2 campaigns on record for this vehicle.
FCP GROTON IS RECALLING CERTAIN STEERING CENTER DRAG LINKS, P/N 32 21 1 096 057, SOLD FROM DECEMBER 1, 2009 THROUGH APRIL 9, 2010 AS REPLACEMENT EQUIPMENT FOR MODEL YEAR 1995 THROUGH 2001 BMW 740I, 740IL, AND 750IL… Remedy: FCP GROTON WILL NOTIFY OWNERS AND THE TIE ROD WILL BE REPLACED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT JUNE 1, 2010. OWNERS MAY CONTACT FCP GROTON…
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BRAKE LAMPS IN THESE VEHICLES ARE CONTROLLED BY A SWITCH ACTIVATED BY THE MOVEMENT OF THE BRAKE PEDAL. THIS SWITCH COULD FAIL INTERNALLY, CAUSING IT TO REMAIN EITHER IN THE… Remedy: DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE EXISTING BRAKE LAMP SWITCH WITH AN IMPROVED SWITCH.
Showing 5 of 8 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B160623 | 2023-12-20 | Engine And Engine Cooling | Engine will crank but not start. There is no communication with the integrated fuel… |
| B653423 | 2023-11-22 | Electrical System | Customers may state that the alarm system (DWA) is not active after locking their… |
| B662419 | 2022-09-01 | Equipment | Vehicle cannot be opened or closed using comfort access, engine start is not possible… |
| B650916 | 2018-11-01 | Equipment | Radio / Navigation / Head Unit Identification Guide |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.9 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 15 city / 22 highway / 18 combined mpg.