Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 650i xDrive.
The 2014 BMW 650i xDrive is a passenger car equipped with an eight-speed automatic transmission and all-wheel drive, requiring a substantial 9.5 quarts of 0W-30, 0W-40, or 5W-30 oil and returning EPA estimates of 16 mpg city, 24 highway, and 19 combined. This model year recorded only six owner complaints, all centered on latches, locks, and linkages, with no recalls, indicating a notably trouble-free reliability record for the series.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 49 · 900 CCA battery, OE oil filter 11427583220. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11427583220 |
| Engine air filter | 13717577457 alt 13717577458 |
| Spark plug | 12120040581 |
| Battery | 61217648317 alt 61217639053 |
| Front wiper blades | 61612458020 |
| Thermostat | 11538632664 alt 11537586885 |
| Cabin air filter | 64116809933 alt 64119272642 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 192.5 in |
| Overall width | 74.4 in |
| Overall height | 53.9 in |
| Wheelbase | 112.6 in |
| Curb weight | 4409 lb |
| Track (front / rear) | 63 / 65.7 in |
| Weight distribution (front / rear) | 54/46 |
| EPA city / highway / combined | 16 / 24 / 19 mpg |
| Drivetrain | All-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 9.5 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 103 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-4-8-6-3-7-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.2 Pints |
| Differential Gear Oil Capacity | 2.9 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 9.5 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 103 ft-lbs |
| Cylinder Firing Order | 1-5-4-8-6-3-7-2 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.75-3.00 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Optional BCI Group Number | 49 |
| Optional BCI Cranking Performance | 850 cca |
| Standard BCI Group Number | 49 |
| Standard BCI Cranking Performance | 900 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 28-32 psi |
| Engine Compression | 203-261 psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.945 in |
| Rotor Nominal Thickness To | 0.945 in |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 0.882 in |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
The 2014 BMW 650i xDrive recorded 6 complaints with zero recalls, positioning it as the higher-complaint year compared to the 2015 model's 3 complaints—though notably, 2015 introduced 1 recall despite lower complaint volume. The target year's complaint distribution across latches/locks/linkages, forward collision avoidance, powertrain, and a combined electronic stability control/engine category reveals no dominant failure mode, while the 1 ongoing NHTSA investigation carried forward into 2015 unchanged. The 344 TSBs in 2014 (versus 282 in 2015) indicates the model year was still under active technical refinement as issues were identified and addressed. Both years show zero crash and fire complaints, which is a positive safety signal. The trend suggests 2014 represents the generation's early-issue period with higher complaint frequency and TSB volume, though the absence of recalls is notable given the subsequent year's recall emergence. **Takeaway:** The 2014 model appears to be a reasonable purchase within this generation arc—it carries more teething-type complaints and technical bulletins than 2015, but has avoided the recall that materialized the following year, suggesting preemptive service attention at purchase could mitigate those early-year issues.
All 6 complaints on record, top 6 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 5 of 344 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B010122 | 2026-01-21 | Engine | N63TU1 CLASS ACTION SETTLEMENT SVC CAMPAIGN: OIL CONSUMPTION DIAGNOSIS/REPAIR |
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| B340914 | 2023-06-01 | Wheels | The Dynamic Stability Control (DSC) warning light comes on while driving. The following… |
| B651523 | 2023-05-01 | Electrical System | After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode)… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
9.5 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 16 city / 24 highway / 19 combined mpg.